WhichTractor
  • WhichTractor size: Utility
  • No lab test on file
  • 2003–2013

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 6460A specs: hp, weight, years

Perkins 1104 C-44 TA four-cylinder diesel. The manufacturer claimed 113.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

113.5 hp

84.6 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 6460”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,987 lb
Hyd. flow
29.0 gpm
Top speed
24.9–31.1 mph

Massey Ferguson 6460A specs: key facts

  • The Massey Ferguson 6460A was built from 2003 to 2013.

  • The Massey Ferguson 6460A has a claimed engine power (gross or net not stated) of 84.6 kW (113.5 hp); it has no measured PTO figure.

  • The Massey Ferguson 6460A was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 6460A has a Perkins 1104 C-44 TA engine, a 4-cylinder 4.40 L diesel unit.

  • The Massey Ferguson 6460A weighs 4,530 kg (9,987 lb) unladen.

  • The Massey Ferguson 6460A has an independent rear PTO running at 540 rpm / 1000 rpm.

  • The hydraulic pump of the Massey Ferguson 6460A delivers 109.8 L/min (29.0 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

How does the 6460A compare with its class?

  • Strength:

    A hydraulic pump flow of 110 L/min is high for its class — 69% above the median of 64.8 L/min across the 205 machines within 10% of its power that hold this figure.

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 287 tractors within 10% of its power, 10% carry one.

Derived by WhichTractor from 287 comparable records. How we work this out

Illustration of the 2003–2013 Massey Ferguson MF 6460 A, a 113 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 6460A have?

The only figure for the 6460A is 113.5 hp (84.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
113.5 hp

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

What engine is in a 6460A?

A 6460A has a Perkins 1104 C-44 TA, a 4-cylinder 4.40 L diesel engine.

Engine — 6460A engine specifications
Make & modelPerkins 1104 C-44 TA
Cylinders4, liquid-cooled
Displacement268.4 ci · 4.40 L
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

How much will a 6460A lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 6460A are below.

Hydraulics & PTO — 6460A hydraulics and PTO specifications
Pump flow29.0 gpm · 109.8 L/min
Pressure3,336 psi · 230 bar
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540 rpm / 1000 rpm @ 1,976 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 part

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

What transmission does a 6460A have?

Transmission specifications for the 6460A are below.

Transmission — 6460A transmission specifications
BrakesHydraulically operated wet BORG WARNER double disc brake
SteeringHydrostatic DANFOSS steering
Top speed24.9–31.1 mph · 40–50 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

How much does a 6460A weigh?

A 6460A weighs 9,987 lb (4,530 kg) unladen.

Weights & dimensions — 6460A weights and dimensions
Unladen weight9,987 lb · 4,530 kgtwo-wheel-drive version
Maximum permissible mass19,401 lb · 8,800 kg
Wheelbase100.5 in · 2,553 mmtwo-wheel-drive version
Length166.3 in · 4,225 mm
Width70.5–100.4 in · 1,790–2,550 mm
Height111.8 in · 2,840 mm
Ground clearance17.7 in · 449 mm
Front track53.7–88.0 in · 1,363–2,235 mmtwo-wheel-drive version
Rear track56.9–77.1 in · 1,445–1,959 mm

Source · Traktorenlexikon, “Massey Ferguson MF 6460”

What oil does a 6460A take, and how much?

A 6460A engine takes 15.3 qt (14.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

6460A fluid capacities, grades and service intervals
SystemCapacity
Engine oil15.3 qt · 14.5 LSource: Traktorenlexikon, “Massey Ferguson MF 6460” · single source, not independently verified
Hydraulic72.9 qt · 69.0 LSource: Traktorenlexikon, “Massey Ferguson MF 6460” · single source, not independently verified
Front axle7.2 qt · 6.8 LSource: Traktorenlexikon, “Massey Ferguson MF 6460” · single source, not independently verified
Cooling system26.4 qt · 25.0 LSource: Traktorenlexikon, “Massey Ferguson MF 6460” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 6460A?

Within 10% of its 113.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 6460A

Is a 6460A two-wheel drive or four-wheel drive?

The Massey Ferguson 6460A was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 6460A have?

A 6460A has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 part shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 6460”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 6460 — CC BY-SA 4.0, WIKIBOOKS-TL-87387 · revision 857692. Wikibooks contributors (Traktorenlexikon). Original document