- Vehicle type: unspecified
- Crawler
- WhichTractor size: Utility
- No lab test on file
- 1927–1929
- 7,224 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Lanz HR 2 specs: hp, weight, years
The manufacturer claimed 21.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
21.6 hp
16.1 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Lanz HR 2”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,512 lb
- Top speed
- 5.0 mph
Lanz HR 2 specs: key facts
The Lanz HR 2 was built from 1927 to 1929.
The Lanz HR 2 has a claimed engine power (gross or net not stated) of 16.1 kW (21.6 hp); it has no measured PTO figure.
The Lanz HR 2 is a tracked machine.
The Lanz HR 2 weighs 2,500 kg (5,512 lb) unladen.
The Lanz HR 2 has a rear PTO running at 500 rpm.
Source · Traktorenlexikon, “Lanz HR 2”
How does the HR 2 compare with its class?
- Worth knowing:
An unladen mass of 2,500 kg is high for its class — 69% above the median of 1,475 kg across the 89 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 89 comparable records. How we work this out
How much horsepower does an HR 2 have?
The only figure for the HR 2 is 21.6 hp (16.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Lanz HR 2”
How much will an HR 2 lift?
Hydraulic and PTO specifications for the HR 2 are below.
| Rear PTO | transmission-driven, 500 rpm |
|---|
Source · Traktorenlexikon, “Lanz HR 2”
What transmission does an HR 2 have?
Transmission specifications for the HR 2 are below.
| Clutch | Hand lever operated three shoe clutch with clutch brake |
|---|---|
| Brakes | Hand and foot brake designed as external band brake acting on transmission |
| Steering | Mechanical worm steering |
| Top speed | 5.0 mph · 8.0 km/h |
Source · Traktorenlexikon, “Lanz HR 2”
How much does an HR 2 weigh?
An HR 2 weighs 5,512 lb (2,500 kg) unladen.
| Unladen weight | 5,512 lb · 2,500 kg |
|---|---|
| Wheelbase | 70.9 in · 1,800 mm |
| Length | 126.0 in · 3,200 mm |
| Width | 65.0 in · 1,650 mm |
| Height | 82.7 in · 2,100 mm |
| Front track | 53.1 in · 1,350 mm |
| Rear track | 59.1 in · 1,500 mm |
Source · Traktorenlexikon, “Lanz HR 2”
Common questions about the Lanz HR 2
Is an HR 2 two-wheel drive or four-wheel drive?
The Lanz HR 2 is a tracked machine.
What PTO does an HR 2 have?
An HR 2 has a 500 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Lanz HR 2”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Lanz HR 2 — CC BY-SA 4.0, WIKIBOOKS-TL-101553 · revision 1018486. Wikibooks contributors (Traktorenlexikon). Original document