- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1937–1954
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Lanz D 2531 Full specifications
The manufacturer claimed 54.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
54.0 hp
40.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Lanz D 2531”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 9,480 lb
- Top speed
- 19.0 mph
Lanz D 2531 specs: key facts
The Lanz D 2531 was built from 1937 to 1954.
The Lanz D 2531 has a claimed engine power (gross or net not stated) of 40.3 kW (54.0 hp); it has no measured PTO figure.
The Lanz D 2531 is two-wheel drive (2WD).
The Lanz D 2531 weighs 4,300 kg (9,480 lb) unladen.
The Lanz D 2531 has a rear PTO running at 750 rpm.
Source · Traktorenlexikon, “Lanz D 2531”
How does the D 2531 compare with its class?
- Limitation:
Forward gears is low for its class. 5 — 44% below the median of 9 across the 354 machines within 10% of its power.
- Strength:
Fuel tank is high for its class. 200 L — 194% above the median of 68.1 L across the 338 machines within 10% of its power.
- Worth knowing:
Unladen mass is high for its class. 4,300 kg — 76% above the median of 2,445 kg across the 357 machines within 10% of its power.
Derived by WhichTractor from 357 comparable records. How we work this out
How much horsepower does a D 2531 have?
The only figure for the D 2531 is 54.0 hp (40.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Lanz D 2531”
How much will a D 2531 lift?
Hydraulic and PTO specifications for the D 2531 are below.
| Rear PTO | 750 rpm |
|---|
Source · Traktorenlexikon, “Lanz D 2531”
What transmission does a D 2531 have?
Transmission specifications for the D 2531 are below.
| Steering | Mechanical worm steering |
|---|---|
| Top speed | 19.0 mph · 30.6 km/h |
Source · Traktorenlexikon, “Lanz D 2531”
How much does a D 2531 weigh?
A D 2531 weighs 9,480 lb (4,300 kg) unladen.
| Unladen weight | 9,480 lb · 4,300 kg |
|---|---|
| Wheelbase | 99.0 in · 2,515 mm |
| Length | 153.5 in · 3,900 mm |
| Width | 85.0 in · 2,160 mm |
| Height | 84.6 in · 2,150 mm |
| Ground clearance | 10.8 in · 275 mm |
| Front track | 53.9 in · 1,370 mm |
| Rear track | 64.2 in · 1,630 mm |
Source · Traktorenlexikon, “Lanz D 2531”
What oil does a D 2531 take, and how much?
A D 2531 engine takes 18.0 qt (17 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity | Grade | Interval |
|---|---|---|---|
| Engine oil | 18.0 qt · 17 LSource: Traktorenlexikon, “Lanz D 2531” · single source, not independently verified | — | — |
| Cooling system | 52.8 qt · 50 LSource: Traktorenlexikon, “Lanz D 2531” · single source, not independently verified | — | — |
Always confirm against the operator’s manual for your machine before service.
Everything else people ask
Is a D 2531 two-wheel drive or four-wheel drive?
The Lanz D 2531 is two-wheel drive (2WD).
What PTO does a D 2531 have?
A D 2531 has a 750 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Lanz D 2531”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Lanz D 2531 — CC BY-SA 4.0, WIKIBOOKS-TL-101684 · revision 1016719. Wikibooks contributors (Traktorenlexikon). Original document