- Vehicle type: unspecified
- Crawler
- WhichTractor size: High-power
- Not independently tested
- 1937–1946
It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Lanz D 1561 Full specifications
The manufacturer claimed 49.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
49.1 hp
36.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Lanz D 1561”, claimed
- Weight
- 11,640 lb
- Top speed
- 4.8 mph
Lanz D 1561 specs: key facts
The Lanz D 1561 was built from 1937 to 1946.
The Lanz D 1561 has a claimed engine power (gross or net not stated) of 36.6 kW (49.1 hp); it has no measured PTO figure.
The Lanz D 1561 is a tracked machine.
The Lanz D 1561 weighs 5,280 kg (11,640 lb) unladen.
The Lanz D 1561 has a rear PTO running at 554 rpm.
Source · Traktorenlexikon, “Lanz D 1561”
How much horsepower does a D 1561 have?
The only figure for the D 1561 is 49.1 hp (36.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Lanz D 1561”
How much will a D 1561 lift?
Hydraulic and PTO specifications for the D 1561 are below.
| Rear PTO | 554 rpm |
|---|
Source · Traktorenlexikon, “Lanz D 1561”
What transmission does a D 1561 have?
Transmission specifications for the D 1561 are below.
| Clutch | Pedal operated dual-disc clutch with clutch brake |
|---|---|
| Top speed | 4.8 mph · 7.7 km/h |
Source · Traktorenlexikon, “Lanz D 1561”
How much does a D 1561 weigh?
A D 1561 weighs 11,640 lb (5,280 kg) unladen.
| Unladen weight | 11,640 lb · 5,280 kg |
|---|---|
| Length | 120.9 in · 3,070 mm |
| Width | 77.2 in · 1,960 mm |
| Height | 93.7 in · 2,380 mm |
| Ground clearance | 13.0 in · 330 mm |
| Front track | 61.4 in · 1,560 mmWikibooks gives one track for both axles |
| Rear track | 61.4 in · 1,560 mmWikibooks gives one track for both axles |
| Turning radius, braked | 5.4 ft · 1.66 m |
Source · Traktorenlexikon, “Lanz D 1561”
Everything else people ask
Is a D 1561 two-wheel drive or four-wheel drive?
The Lanz D 1561 is a tracked machine.
What PTO does a D 1561 have?
A D 1561 has a 554 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Lanz D 1561”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Lanz D 1561 — CC BY-SA 4.0, WIKIBOOKS-TL-86472 · revision 1020421. Wikibooks contributors (Traktorenlexikon). Original document