- Rigid chassis
- WhichTractor size: Sub-compact
- No lab test on file
- 1992–2003
WhichTractor size, not the maker’s category
Lamborghini 250 DT Hydraulics & PTO specs
16 hydraulics and PTO values on record for the 250 DT.
Engine power, claimed · gross or net not stated
24.7 hp
18.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Lamborghini Runner 250 DT A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 250 DT lift?
A 250 DT lifts 2,646 lb (1,200 kg) at the lower-link ends.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 2.2 gpm · 8.3 L/min |
| Hydraulic pressure | 1,305 psi · 90 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 2,646 lb · 1,200 kg |
| Hitch control | Lifting, lowering, floating position, position and draft control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Lamborghini Runner 250 DT A”
What PTO does a 250 DT have?
A 250 DT has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,646 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| Mid PTO available, optional | Yes |
Source · Traktorenlexikon, “Lamborghini Runner 250 DT A”
Sources and how this page was built
16 hydraulics and PTO values from Traktorenlexikon, “Lamborghini Runner 250 DT A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Lamborghini Runner 250 DT A — CC BY-SA 4.0, WIKIBOOKS-TL-114456 · revision 991465. Wikibooks contributors (Traktorenlexikon). Original document