- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1958–1959
- 18 built
WhichTractor size, not the maker’s category
Kramer KWD 250 Hydraulics & PTO specs
8 hydraulics and PTO values on record for the KWD 250.
Engine power, claimed · gross or net not stated
24 hp
18 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Kramer KWD 250”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a KWD 250 have?
Hydraulic and hitch specifications for the KWD 250 are below.
| Pump flow | 4.2 gpm · 16.0 L/min |
|---|---|
| Hydraulic pressure | 1,707 psi · 118 bar |
| Lift capacity (point not stated) | 2,425 lb · 1,100 kg |
Source · Traktorenlexikon, “Kramer KWD 250”
What PTO does a KWD 250 have?
A KWD 250 has a 528 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 528 rpm |
| Rear PTO shaft | 1 3/8"-6 splines |
| PTO power, claimed | 24 hp · 17.7 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Kramer KWD 250”
Sources and how this page was built
8 hydraulics and PTO values from Traktorenlexikon, “Kramer KWD 250”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Kramer KWD 250 — CC BY-SA 4.0, WIKIBOOKS-TL-82479 · revision 991347. Wikibooks contributors (Traktorenlexikon). Original document