- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1974–1977
- 1,228 built
WhichTractor size, not the maker’s category
John Deere 930 Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 930.
Engine power, claimed · gross or net not stated
40.5 hp
30.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 930”, claimed
How much will a 930 lift?
A 930 lifts 3,490 lb (1,583 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 6.7 gpm · 25.4 L/min |
| Hydraulic pressure | 3,481–4,496 psi · 240–310 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 3,490 lb · 1,583 kg |
Source · Traktorenlexikon, “John Deere 930”
What PTO does a 930 have?
PTO specifications for the 930 are below.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds, optional | 540/1000 rpm |
| Engine speed at 540 PTO | 2,075 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
| Front PTO available, optional | Yes |
| PTO power, claimed | 35.9 hp · 26.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “John Deere 930”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “John Deere 930”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere 930 — CC BY-SA 4.0, WIKIBOOKS-TL-49342 · revision 957531. Wikibooks contributors (Traktorenlexikon). Original document