• Vehicle type: unspecified
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 2000–2002

WhichTractor size, not the maker’s category

John Deere 8210 T Hydraulics & PTO specifications

21 hydraulics and PTO values on record for the 8210 T.

Engine power, claimed · gross or net not stated

212.1 hp

158.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 8210T”, claimed

What hydraulics does an 8210 T have?

Hydraulic and hitch specifications for the 8210 T are below.

Hydraulics & hitch — 8210 T Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Hydraulic controlLoad sensing
Pump flow34.7 gpm · 131.4 L/min
Hydraulic pressure3,379 psi · 233 bar
Rear remote valves3
Rear remote valves, optional5

Source · Traktorenlexikon, “John Deere 8210T”

What PTO does an 8210 T have?

An 8210 T has a 1000 rpm rear PTO.

PTO — 8210 T PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
PTO engages under loadYes
Rear PTO speeds1000 rpm
Rear PTO shaft1 3/8"- 20 teilig
PTO power, claimed216.3 hp · 161.3 kWClaimed; standard not stated by the source

Source · Traktorenlexikon, “John Deere 8210T”

How much power does an 8210 T deliver at the PTO?

On OECD Test 1934, the 8210 T delivered 216.3 hp (161.3 kW) at the PTO shaft, at maximum power.

OECD Test 1934 — 8210 T as tested, configuration as printed: “Rubber tracklaying tractor · Powershift - 30 km/h”
PTO power, at maximum power216.3 hp · 161.3 kWAt 917 PTO rpmAt 2,000 engine rpm
PTO power, at rated engine speed188.1 hp · 140.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm
PTO power, at standard PTO speed188.1 hp · 140.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm
PTO shaft speed, at maximum power917 rpm
PTO shaft speed, at rated engine speed1,009 rpm
PTO shaft speed, at standard PTO speed1,009 rpm
Hydraulic power, at maximum power48.5 hp · 36.2 kW
Hydraulic pump delivery, at maximum power32.8 gpm · 124.2 L/min
Three-point lift force12,747 lbf · 56.7 kN

Source · OECD test report 1934, 2000

Where this page comes from

21 hydraulics and PTO values from OECD test report 1934, 2000; and Traktorenlexikon, “John Deere 8210T”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/1 934: John Deere 8210T — Licence not stated by the publisher; facts cited, OECD-1934 · published 2000-11-03 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: John Deere 8210TCC BY-SA 4.0, WIKIBOOKS-TL-106395 · revision 878405. Wikibooks contributors (Traktorenlexikon). Original document