- Vehicle type: unspecified
- Standard layout, Rigid chassis
- WhichTractor size: High-power
- Lab tested ×1
- 1999–2002
WhichTractor size, not the maker’s category
John Deere 8110 Hydraulics & PTO specs
20 hydraulics and PTO values on record for the 8110.
Engine power, claimed · gross or net not stated
192.4 hp
143.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 8110”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an 8110 have?
Hydraulic and hitch specifications for the 8110 are below.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 31.8 gpm · 120.4 L/min |
| Hydraulic pressure | 2,683 psi · 185 bar |
| Rear remote valves | 3 |
Source · Traktorenlexikon, “John Deere 8110”
What PTO does an 8110 have?
An 8110 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpmSource 1 |
| Engine speed at 540 PTO | 1,978 rpm |
| Rear PTO shaft | 1 3/8"- 20 teilig |
Source · Traktorenlexikon, “John Deere 8110”
How much power does an 8110 deliver at the PTO?
On OECD Test 1931, the 8110 delivered 188.3 hp (140.4 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 188.3 hp · 140.4 kWAt 917 PTO rpmAt 2,000 engine rpm |
|---|---|
| PTO power, at rated engine speed | 165.3 hp · 123.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 165.3 hp · 123.3 kWAt 1,009 PTO rpmAt 2,200 engine rpm |
| PTO shaft speed, at maximum power | 917 rpm |
| PTO shaft speed, at rated engine speed | 1,009 rpm |
| PTO shaft speed, at standard PTO speed | 1,009 rpm |
| Hydraulic power, at maximum power | 49.3 hp · 36.8 kW |
| Hydraulic pump delivery, at maximum power | 33.2 gpm · 125.7 L/min |
| Three-point lift force | 12,275 lbf · 54.6 kN |
Source · OECD test report 1931, 2000
Sources and how this page was built
20 hydraulics and PTO values from OECD test report 1931, 2000; and Traktorenlexikon, “John Deere 8110”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 931: John Deere 8110 — Licence not stated by the publisher; facts cited, OECD-1931 · published 2000-11-02 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: John Deere 8110 — CC BY-SA 4.0, WIKIBOOKS-TL-48442 · revision 878220. Wikibooks contributors (Traktorenlexikon). Original document