WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×2
  • 2007–2011

WhichTractor size, not the maker’s category

John Deere 7930 Hydraulics & PTO specifications

20 hydraulics and PTO values on record for the 7930.

Engine power, claimed · gross or net not stated

217.1 hp

161.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 7930”, claimed

How much will a 7930 lift?

A 7930 lifts 15,543 lb (7,050 kg) at the lower-link ends.

Hydraulics & hitch — 7930 Hydraulics & hitch
Hydraulic centreClosed centreSource 2
Hydraulic controlLoad sensing
Pump flow32.0 gpm · 121.1 L/min
Rear remote valves3
Three-point hitch categoryCategory 3
Lift capacity at ball ends15,543 lb · 7,050 kg

Source · Traktorenlexikon, “John Deere 7930”

What PTO does a 7930 have?

A 7930 has a 540/1000 rpm rear PTO.

PTO — 7930 PTO
Rear PTO speeds540/1000 rpm
Engine speed at 540 PTO1,950 rpm
Rear PTO shaft35 mm, 6 splines / 35 mm, 21 splinesSource 1
Front PTO availableYes
PTO power, claimed200.8 hp · 149.7 kWClaimed; standard not stated by the source

Source · Traktorenlexikon, “John Deere 7930”

How much power does a 7930 deliver at the PTO?

On OECD Test 2406, the 7930 delivered 202.1 hp (150.7 kW) at the PTO shaft, at maximum power.

OECD Test 2406 — 7930 as tested, configuration as printed: “4 WD · IVT - MFWD - 40 km/h”
PTO power, at maximum power202.1 hp · 150.7 kWAt 973 PTO rpmAt 1,900 engine rpm
PTO power, at rated engine speed182.9 hp · 136.4 kWAt 1,075 PTO rpmAt 2,100 engine rpm
PTO power, at standard PTO speed198.7 hp · 148.2 kWAt 1,000 PTO rpmAt 1,953 engine rpm
PTO shaft speed, at maximum power973 rpm
PTO shaft speed, at rated engine speed1,075 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power42.6 hp · 31.8 kW
Hydraulic pump delivery, at maximum power38.1 gpm · 144.2 L/min
Three-point lift force16,906 lbf · 75.2 kN

Source · OECD test report 2406, 2008

How much PTO power did the 7930 deliver on Test 2408?

On OECD Test 2408, the 7930 delivered 203.4 hp (151.7 kW) at the PTO shaft, at maximum power.

OECD Test 2408 — 7930 as tested, configuration as printed: “4 WD · AutoQuad Plus - MFWD - 40 km/h”
PTO power, at maximum power203.4 hp · 151.7 kWAt 947 PTO rpmAt 1,850 engine rpm
PTO power, at rated engine speed183.0 hp · 136.5 kWAt 1,075 PTO rpmAt 2,100 engine rpm
PTO power, at standard PTO speed200.8 hp · 149.7 kWAt 1,000 PTO rpmAt 1,953 engine rpm
PTO shaft speed, at maximum power947 rpm
PTO shaft speed, at rated engine speed1,075 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power43.0 hp · 32.1 kW
Hydraulic pump delivery, at maximum power38.4 gpm · 145.4 L/min
Three-point lift force16,906 lbf · 75.2 kN

Source · OECD test report 2408, 2008

Where this page comes from

20 hydraulics and PTO values from OECD test report 2408, 2008; Traktorenlexikon, “John Deere 7930”; and OECD test report 2406, 2008.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 406: John Deere 7930 — Licence not stated by the publisher; facts cited, OECD-2406 · published 2008-03-20 · retrieved 2026-09-14. OECD. Original document
  2. OECD Code 2 test report 2/2 408: John Deere 7930 — Licence not stated by the publisher; facts cited, OECD-2408 · published 2008-05-16 · retrieved 2026-09-14. OECD; testing station Nebraska Tractor Test Laboratory,. Original document
  3. Traktorenlexikon: John Deere 7930 — CC BY-SA 4.0, WIKIBOOKS-TL-48163 · revision 1019480. Wikibooks contributors (Traktorenlexikon). Original document