- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×2
- 1997–2002
WhichTractor size, not the maker’s category
John Deere 7210 Hydraulics & PTO specifications
17 hydraulics and PTO values on record for the 7210.
Engine power, claimed · gross or net not stated
109 hp
81 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 7210”, claimed
What hydraulics does a 7210 have?
Hydraulic and hitch specifications for the 7210 are below.
| Hydraulic centre | Closed centreSource 2 |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 27.3 gpm · 103.3 L/min |
| Hydraulic pressure | 2,944–3,031 psi · 203–209 bar |
| Rear remote valves | 4 |
Source · Traktorenlexikon, “John Deere 7210”
What PTO does a 7210 have?
A 7210 has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 2,080 rpm |
| Rear PTO shaft | 35 mm, 6 splines / 35 mm, 21 splinesSource 2 |
Source · Traktorenlexikon, “John Deere 7210”
How much power does a 7210 deliver at the PTO?
On OECD Test 1748, the 7210 delivered 97.5 hp (72.7 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 97.5 hp · 72.7 kWAt 810 PTO rpmAt 1,700 engine rpm |
|---|---|
| PTO power, at rated engine speed | 95.7 hp · 71.4 kWAt 1,002 PTO rpmAt 2,100 engine rpm |
| PTO power, at standard PTO speed | 95.7 hp · 71.4 kWAt 1,002 PTO rpmAt 2,100 engine rpm |
| PTO shaft speed, at maximum power | 810 rpm |
| PTO shaft speed, at rated engine speed | 1,002 rpm |
| PTO shaft speed, at standard PTO speed | 1,002 rpm |
| Hydraulic power, at maximum power | 37.7 hp · 28.1 kW |
| Hydraulic pump delivery, at maximum power | 25.5 gpm · 96.5 L/min |
| Three-point lift force | 10,454 lbf · 46.5 kN |
Source · OECD test report 1748, 1998
How much PTO power did the 7210 deliver on Test 1749?
On OECD Test 1749, the 7210 delivered 98.3 hp (73.3 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 98.3 hp · 73.3 kWAt 858 PTO rpmAt 1,800 engine rpm |
|---|---|
| PTO power, at rated engine speed | 95.9 hp · 71.5 kWAt 1,002 PTO rpmAt 2,100 engine rpm |
| PTO power, at standard PTO speed | 95.9 hp · 71.5 kWAt 1,002 PTO rpmAt 2,100 engine rpm |
| PTO shaft speed, at maximum power | 858 rpm |
| PTO shaft speed, at rated engine speed | 1,002 rpm |
| PTO shaft speed, at standard PTO speed | 1,002 rpm |
| Hydraulic power, at maximum power | 37.5 hp · 28.0 kW |
| Hydraulic pump delivery, at maximum power | 25.5 gpm · 96.5 L/min |
| Three-point lift force | 10,454 lbf · 46.5 kN |
Source · OECD test report 1749, 1998
Where this page comes from
17 hydraulics and PTO values from OECD test report 1749, 1998; Traktorenlexikon, “John Deere 7210”; and OECD test report 1748, 1998.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 748: John Deere 7210 — Licence not stated by the publisher; facts cited, OECD-1748 · published 1998-04-16 · retrieved 2026-09-14. OECD. Original document
- OECD Code 2 test report 2/1 749: John Deere 7210 — Licence not stated by the publisher; facts cited, OECD-1749 · published 1998-04-27 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: John Deere 7210 — CC BY-SA 4.0, WIKIBOOKS-TL-106376 · revision 883597. Wikibooks contributors (Traktorenlexikon). Original document