- WhichTractor size: Utility
- No lab test on file
- 1996–2003
WhichTractor size, not the maker’s category
John Deere 1846 FA Hydraulics & PTO specs
10 hydraulics and PTO values on record for the 1846 FA.
Engine power, claimed · gross or net not stated
55.3 hp
41.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “John Deere 1846 F/A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 1846 FA lift?
An 1846 FA lifts 3,461 lb (1,570 kg) at the lower-link ends.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 6.9 gpm · 26.0 L/min |
| Hydraulic pressure | 2,176 psi · 150 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 3,461 lb · 1,570 kg |
Source · Traktorenlexikon, “John Deere 1846 F/A”
What PTO does an 1846 FA have?
An 1846 FA has a 540 rpm / 750 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm / 750 rpm / 1000 rpm |
| Engine speed at 540 PTO | 2,160 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “John Deere 1846 F/A”
Sources and how this page was built
10 hydraulics and PTO values from Traktorenlexikon, “John Deere 1846 F/A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: John Deere 1846 F/A — CC BY-SA 4.0, WIKIBOOKS-TL-106994 · revision 885960. Wikibooks contributors (Traktorenlexikon). Original document