- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1958–1960
- 1,481 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
J.I. Case 511-B Full specifications
CASE 164 four-cylinder petrol. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 511-B”, claimed
- Weight
- 4,720 lb
- Hyd. flow
- 3.0 gpm
- Top speed
- 12.4–18.6 mph
J.I. Case 511-B specs: key facts
The J.I. Case 511-B was built from 1958 to 1960.
The J.I. Case 511-B has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.
The J.I. Case 511-B is two-wheel drive (2WD).
The J.I. Case 511-B has a CASE 164 engine, a 4-cylinder 2.70 L petrol unit.
The J.I. Case 511-B weighs 2,141 kg (4,720 lb) unladen.
The J.I. Case 511-B has a dependent rear PTO running at 540 rpm.
The hydraulic pump of the J.I. Case 511-B delivers 11.4 L/min (3.0 gpm).
Source · Traktorenlexikon, “Case 511-B”
How much horsepower does a 511-B have?
The only figure for the 511-B is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 511-B”
What engine is in a 511-B?
A 511-B has a CASE 164, a 4-cylinder 2.70 L petrol engine.
| Make & model | CASE 164 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 164.5 ci · 2.70 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case 511-B”
How much will a 511-B lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 511-B are below.
| Pump flow | 3.0 gpm · 11.4 L/min |
|---|---|
| Rear PTO | Dependent, transmission-driven, 540 rpm @ 1,925 engine rpm |
Source · Traktorenlexikon, “Case 511-B”
What transmission does a 511-B have?
Transmission specifications for the 511-B are below.
| Clutch | pedal-operated CASE single-plate clutch |
|---|---|
| Brakes | pedal-operated double-disc brake acting on the rear wheels, designed as steering brake |
| Top speed | 12.4–18.6 mph · 20–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case 511-B”
How much does a 511-B weigh?
A 511-B weighs 4,720 lb (2,141 kg) unladen.
| Unladen weight | 4,720 lb · 2,141 kg |
|---|---|
| Wheelbase | 87.0 in · 2,210 mm |
| Length | 138.0 in · 3,505 mm |
| Width | 80.7 in · 2,051 mm |
| Height | 65.5 in · 1,664 mm |
| Rear track | 52.0–88.0 in · 1,321–2,235 mm |
Source · Traktorenlexikon, “Case 511-B”
Which tractors compare with a 511-B?
Within 10% of its 44.4 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 510-B44.4 hp PTO, claimed · 1958–1959Side by side with the 511-B →
- BOLINDER-MUNKTELL 350 Boxer44.4 hp PTO, claimed · 1959–1967Side by side with the 511-B →
- David Brown 990 Implematic44.4 hp PTO, claimed · 1961–1965Side by side with the 511-B →
- Hürlimann D-60044 hp PTO, claimed · 1951–1954Side by side with the 511-B →
- Steyr 29044 hp PTO, claimed · 1966–1967Side by side with the 511-B →
- International Harvester 50444.1 hp PTO, claimed · 1961–1968Side by side with the 511-B →
Everything else people ask
Is a 511-B two-wheel drive or four-wheel drive?
The J.I. Case 511-B is two-wheel drive (2WD).
What PTO does a 511-B have?
A 511-B has a dependent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 511-B”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 511-B — CC BY-SA 4.0, WIKIBOOKS-TL-115260 · revision 970630. Wikibooks contributors (Traktorenlexikon). Original document