• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1984–1985
  • 224 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 4994 Full specifications

SAAB-SCANIA 14-L TI eight-cylinder diesel. The manufacturer claimed 394.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

394.5 hp

294.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 4994”, claimed

Weight
31,314 lb
Hyd. flow
35.0 gpm
Top speed
18.6 mph

J.I. Case 4994 specs: key facts

  • The J.I. Case 4994 was built from 1984 to 1985.

  • The J.I. Case 4994 has a claimed engine power (gross or net not stated) of 294.2 kW (394.5 hp); it has no measured PTO figure.

  • The J.I. Case 4994 is four-wheel drive (4WD).

  • The J.I. Case 4994 has a SAAB-SCANIA 14-L TI engine, a 8-cylinder 14.19 L diesel unit.

  • The J.I. Case 4994 weighs 14,204 kg (31,314 lb) unladen.

  • The J.I. Case 4994 has an independent rear PTO running at 1000 rpm.

  • The hydraulic pump of the J.I. Case 4994 delivers 132.5 L/min (35.0 gpm).

Source · Traktorenlexikon, “Case 4994”

How much horsepower does a 4994 have?

The only figure for the 4994 is 394.5 hp (294.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
394.5 hp

Source · Traktorenlexikon, “Case 4994”

What engine is in a 4994?

A 4994 has a SAAB-SCANIA 14-L TI, a 8-cylinder 14.19 L diesel engine.

Engine — 4994 engine specifications
Make & modelSAAB-SCANIA 14-L TI
Cylinders8, liquid-cooled
Displacement866.0 ci · 14.19 L
Max torque965 lb·ft · 1,309 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case 4994”

How much will a 4994 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 4994 are below.

Hydraulics & PTO — 4994 hydraulics and PTO specifications
Pump flow35.0 gpm · 132.5 L/min
Rear PTOIndependent, engine-driven, 1000 rpm

Source · Traktorenlexikon, “Case 4994”

What transmission does a 4994 have?

Transmission specifications for the 4994 are below.

Transmission — 4994 transmission specifications
BrakesPedal-operated hydraulic disc brake acting on differential side shafts
SteeringHydraulic front and electro-hydraulic rear steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case 4994”

How much does a 4994 weigh?

A 4994 weighs 31,314 lb (14,204 kg) unladen.

Weights & dimensions — 4994 weights and dimensions
Unladen weight31,314 lb · 14,204 kg
Wheelbase124.8 in · 3,170 mm
Length261.8 in · 6,650 mm
Width120.0 in · 3,048 mm
Height138.5 in · 3,518 mm
Ground clearance14.5 in · 368 mm
Front track96.1–155.5 in · 2,441–3,950 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track96.1–155.5 in · 2,441–3,950 mmWikibooks gives one track for both axles; the article lists alternatives

Source · Traktorenlexikon, “Case 4994”

Everything else people ask

Is a 4994 two-wheel drive or four-wheel drive?

The J.I. Case 4994 is four-wheel drive (4WD).

What PTO does a 4994 have?

A 4994 has a independent 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 4994”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 4994CC BY-SA 4.0, WIKIBOOKS-TL-115452 · revision 989895. Wikibooks contributors (Traktorenlexikon). Original document