- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1960–1969
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 440 Full specifications
The manufacturer claimed 34.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.1 hp
25.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 440”, claimed
- Weight
- 3,120 lb
- Hyd. flow
- 8.5 gpm
- Top speed
- 12.4–21.7 mph
J.I. Case 440 specs: key facts
The J.I. Case 440 was built from 1960 to 1969.
The J.I. Case 440 has a claimed engine power (gross or net not stated) of 25.4 kW (34.1 hp); it has no measured PTO figure.
The J.I. Case 440 is two-wheel drive (2WD).
The J.I. Case 440 weighs 1,415 kg (3,120 lb) unladen.
The J.I. Case 440 has an independent rear PTO running at 540 rpm.
The hydraulic pump of the J.I. Case 440 delivers 32.2 L/min (8.5 gpm).
Source · Traktorenlexikon, “Case 440”
How much horsepower does a 440 have?
The only figure for the 440 is 34.1 hp (25.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 440”
How much will a 440 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 440 are below.
| Pump flow | 8.5 gpm · 32.2 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | Independent, engine-driven, 540 rpm |
Source · Traktorenlexikon, “Case 440”
What transmission does a 440 have?
Transmission specifications for the 440 are below.
| Steering | Mechanical worm gear steering with hydraulic power assistance |
|---|---|
| Top speed | 12.4–21.7 mph · 20–35 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case 440”
How much does a 440 weigh?
A 440 weighs 3,120 lb (1,415 kg) unladen.
| Unladen weight | 3,120 lb · 1,415 kg |
|---|---|
| Wheelbase | 75.2 in · 1,911 mm |
| Length | 130.2 in · 3,307 mm |
| Width | 61.4 in · 1,559 mm |
| Height | 50.5 in · 1,283 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 47.5 in · 1,207 mm |
| Rear track | 48.0–76.0 in · 1,219–1,930 mm |
| Turning radius, braked | 7.9 ft · 2.41 m |
Source · Traktorenlexikon, “Case 440”
Which tractors compare with a 440?
Within 10% of its 32.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 44132.5 hp PTO, claimed · 1960–1969Side by side with the 440 →
- Güldner G 35 A (S)33 hp PTO, claimed · 1967–1969Side by side with the 440 →
- Renault 42132.5 hp PTO, claimed · 1972–1977Side by side with the 440 →
- Renault N 7032.6 hp PTO, claimed · 1960–1964Side by side with the 440 →
- Deutz D 4032.80 hp PTO, claimed · 1958–1959Side by side with the 440 →
- International Harvester B-27532.3 hp PTO, claimed · 1958–1961Side by side with the 440 →
Everything else people ask
Is a 440 two-wheel drive or four-wheel drive?
The J.I. Case 440 is two-wheel drive (2WD).
What PTO does a 440 have?
A 440 has a independent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 440”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 440 — CC BY-SA 4.0, WIKIBOOKS-TL-115281 · revision 989846. Wikibooks contributors (Traktorenlexikon). Original document