- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- 1984–1985
WhichTractor size, not the maker’s category
J.I. Case 1194 Hydraulics & PTO specs
8 hydraulics and PTO values on record for the 1194.
Engine power, claimed · gross or net not stated
47.3 hp
35.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 1194”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an 1194 have?
Hydraulic and hitch specifications for the 1194 are below.
| Pump flow | 7.0 gpm · 26.5 L/min |
|---|---|
| Steering pump flow | 2.0 gpm · 7.6 L/min |
| Rear remote valves | 1 |
| Lift capacity 610 mm behind ends | 2,183 lb · 990 kg |
| Hitch control | Heft, lowering, float position, draft and position control |
Source · Traktorenlexikon, “Case 1194”
What PTO does an 1194 have?
An 1194 has a 540 rpm rear PTO.
| Rear PTO speeds | 540 rpm |
|---|---|
| Engine speed at 540 PTO | 1,827 rpm |
| PTO power, claimed | 38.6 hp · 28.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case 1194”
Sources and how this page was built
8 hydraulics and PTO values from Traktorenlexikon, “Case 1194”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 1194 — CC BY-SA 4.0, WIKIBOOKS-TL-115414 · revision 989880. Wikibooks contributors (Traktorenlexikon). Original document