- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1971–1975
- 12,756 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
International Harvester 453 Hydraulics & PTO specs
9 hydraulics and PTO values on record for the 453.
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick 453”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a 453 have?
Hydraulic and hitch specifications for the 453 are below.
| Pump flow | 7.6 gpm · 28.7 L/min |
|---|---|
| Hydraulic pressure | 2,843 psi · 196 bar |
| Rear remote valves | 1 |
| Lift capacity 610 mm behind ends | 3,109 lb · 1,410 kg |
Source · Traktorenlexikon, “McCormick 453”
What PTO does a 453 have?
A 453 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
Source · Traktorenlexikon, “McCormick 453”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “McCormick 453”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: McCormick 453 — CC BY-SA 4.0, WIKIBOOKS-TL-118075 · revision 1059857. Wikibooks contributors (Traktorenlexikon). Original document