- Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- from 1986
WhichTractor size, not the maker’s category
IMT 542 Hydraulics & PTO specs
13 hydraulics and PTO values on record for the 542.
Engine power, claimed · gross or net not stated
41.4 hp
30.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IMT 542”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 542 lift?
A 542 lifts 3,102 lb (1,407 kg) at the lower-link ends.
| Pump flow | 4.9 gpm · 18.5 L/min |
|---|---|
| Hydraulic pressure | 2,683 psi · 185 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 3,102 lb · 1,407 kg |
| Hitch control | Lifting, lowering, floating position, position and draft control |
Source · Traktorenlexikon, “IMT 542”
What PTO does a 542 have?
A 542 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,688 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 33.1 hp · 24.7 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “IMT 542”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “IMT 542”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IMT 542 — CC BY-SA 4.0, WIKIBOOKS-TL-120861 · revision 1085972. Wikibooks contributors (Traktorenlexikon). Original document