- Rigid chassis
- WhichTractor size: Utility
- Lab tested ×1
- 1998–2003
WhichTractor size, not the maker’s category
Hürlimann XN-707 Hydraulics & PTO specifications
22 hydraulics and PTO values on record for the XN-707.
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Hürlimann XN 707”, claimed
What hydraulics does a XN-707 have?
Hydraulic and hitch specifications for the XN-707 are below.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 6.6 gpm · 25.0 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity (point not stated) | 4,043 lb · 1,834 kg |
| Hitch control | Lifting, lowering, position, draft and mixed control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Hürlimann XN 707”
What PTO does a XN-707 have?
A XN-707 has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO speeds | 540 rpm / 1000 rpm |
|---|---|
| Engine speed at 540 PTO | 2,077 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
| Front PTO available | Yes |
| PTO power, claimed | 65.32 hp · 48.71 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Hürlimann XN 707”
How much power does a XN-707 deliver at the PTO?
On OECD Test 1822, the XN-707 delivered 66.0 hp (49.2 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 66.0 hp · 49.2 kWSource 2At 566 PTO rpmAt 2,177 engine rpm |
|---|---|
| PTO power, at rated engine speed | 65.7 hp · 49.0 kWSource 2At 612 PTO rpmAt 2,352 engine rpm |
| PTO power, at standard PTO speed | 65.3 hp · 48.7 kWSource 2At 540 PTO rpmAt 2,078 engine rpm |
| PTO shaft speed, at maximum power | 566 rpmSource 2 |
| PTO shaft speed, at rated engine speed | 612 rpmSource 2 |
| PTO shaft speed, at standard PTO speed | 540 rpmSource 2 |
| Hydraulic power, at maximum power | 9.4 hp · 7.0 kWSource 2 |
| Hydraulic pump delivery, at maximum power | 6.6 gpm · 25.0 L/minSource 2 |
| Three-point lift force | 3,664 lbf · 16.3 kNSource 2 |
Source · OECD test report 1822, 1999
Where this page comes from
22 hydraulics and PTO values from Traktorenlexikon, “Hürlimann XN 707”; and OECD test report 1822, 1999.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 1/1 822: Hürlimann XN 707 — Licence not stated by the publisher; facts cited, OECD-1822 · published 1999-04-21 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
- OECD Code 2 test report 1/1 822: Lamborghini Agile 770 S — Licence not stated by the publisher; facts cited, OECD-1822 · published 1999-04-21 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
- Traktorenlexikon: Hürlimann XN 707 — CC BY-SA 4.0, WIKIBOOKS-TL-105243 · revision 1056208. Wikibooks contributors (Traktorenlexikon). Original document