• Orchard & vineyard, Rigid chassis
  • WhichTractor size: Sub-compact
  • Lab tested ×1
  • 1998–2003

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Hürlimann XN-706 specs: hp, weight, years

Hürlimann 1000.3 W-1 three-cylinder diesel or Same Deutz-Fahr Group 1000.3W1. The manufacturer claimed 59.3 horsepower. The only laboratory test on record is of one version: OECD Test 1814 measured 50.8 hp at the PTO of the XN 706 (4 WD). Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 50.8 hp — 14.3% below the claim.

Engine power, claimed · gross or net not stated

59.3 hp

44.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Hürlimann XN 706”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,181 lb
Hyd. flow
9.0 gpm
Top speed
18.6 mph

Hürlimann XN-706 specs: key facts

  • The Hürlimann XN-706 was built from 1998 to 2003.

  • Only one version of the Hürlimann XN-706 has a laboratory test on record: the XN 706 (4 WD) produced 37.9 kW (50.8 hp) at the PTO, measured on OECD Test 1814.Source 3

  • The Hürlimann XN-706 has a claimed engine power (gross or net not stated) of 44.2 kW (59.3 hp); it has no measured PTO figure.

  • The Hürlimann XN-706 is four-wheel drive (4WD).Source 2

  • The Hürlimann XN-706 has a Hürlimann 1000.3 W-1 engine, a 3-cylinder 3.00 L diesel unit.Source 4

  • The Hürlimann XN-706 weighs 2,350 kg (5,181 lb) unladen.

  • The Hürlimann XN-706 has a rear PTO running at 540 rpm / 1000 rpm.

  • The hydraulic pump of the Hürlimann XN-706 delivers 34.0 L/min (9.0 gpm).

Source · Traktorenlexikon, “Hürlimann XN 706”

How does the XN-706 compare with its class?

  • Limitation:

    A maximum engine torque of 163 N·m is low for its class — 22% below the median of 208 N·m across the 294 machines within 10% of its power that hold this figure.

  • Strength:

    20 forward gears is high for its class — 100% above the median of 10 across the 356 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 359 comparable records. How we work this out

Illustration of the 1998–2003 Hürlimann XN-706, a 59 hp narrow orchard and vineyard tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a XN-706 have?

The only laboratory test on record is of one version. OECD Test 1814 measured 50.8 hp at the PTO of the XN 706 (4 WD). For the XN-706 as a whole the figure is the 59.3 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
59.3 hp

Sources · Traktorenlexikon, “Hürlimann XN 706”; OECD test report 1814, 1999

What engine is in a XN-706?

A XN-706 has a Hürlimann 1000.3 W-1, a 3-cylinder 3.00 L diesel engine. XN 706 (4 WD) tractors have a Same Deutz-Fahr Group 1000.3W1.

Engine — XN-706 engine specifications
Make & modelHürlimann 1000.3 W-1Source 4
Cylinders3, liquid-cooledSource 4
Displacement183.1 ci · 3.00 LSource 4
Max torque120 lb·ft · 163 N·m @ 1,665 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Hürlimann XN 706”

How much will a XN-706 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the XN-706 are below.

Hydraulics & PTO — XN-706 hydraulics and PTO specifications
Pump flow9.0 gpm · 34.0 L/min
Pressure3,046 psi · 210 bar
Hitch categoryCategory 2
Rear PTO540 rpm / 1000 rpm @ 2,077 engine rpm
PTO shaft1 3/8" - 6 splines

Source · Traktorenlexikon, “Hürlimann XN 706”

What transmission does a XN-706 have?

Transmission specifications for the XN-706 are below.

Transmission — XN-706 transmission specifications
ClutchPedal-operated dry SDF single-plate clutch
BrakesHydraulically operated wet SLH disc brake acting on differential side shafts
SteeringHydrostatic DANFOSS steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Hürlimann XN 706”

How much does a XN-706 weigh?

A XN-706 weighs 5,181 lb (2,350 kg) unladen.

Weights & dimensions — XN-706 weights and dimensions
Unladen weight5,181 lb · 2,350 kg
Wheelbase75.8 in · 1,926 mm
Length135.1 in · 3,431 mm
Width50.8–64.6 in · 1,290–1,640 mm
Height83.1 in · 2,110 mm
Ground clearance9.1 in · 230 mm
Front track40.2–49.8 in · 1,020–1,265 mm
Rear track35.0–50.8 in · 890–1,290 mm
Turning radius, braked11.2 ft · 3.40 m

Source · Traktorenlexikon, “Hürlimann XN 706”

What oil does a XN-706 take, and how much?

A XN-706 engine takes 7.1 qt (6.7 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

XN-706 fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.1 qt · 6.7 LSource: Traktorenlexikon, “Hürlimann XN 706” · single source, not independently verified
Transmission & hydraulic43.3 qt · 41.0 LSource: Traktorenlexikon, “Hürlimann XN 706” · single source, not independently verified
Front axle6.3 qt · 6.0 LSource: Traktorenlexikon, “Hürlimann XN 706” · single source, not independently verified
Final drives3.2 qt · 3.0 LSource: Traktorenlexikon, “Hürlimann XN 706” · single source, not independently verified
Cooling system12.7 qt · 12.0 LSource: Traktorenlexikon, “Hürlimann XN 706” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

How much fuel does a XN-706 burn per hour?

Measured on OECD Test 1814 (tested as the XN 706 (4 WD)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1814
Test conditionFuel per hour
Maximum PTO powerPTO 37.9 kW (50.8 hp) at 611 rpm12.80 L/h 3.38 gal/h
Rated engine speedPTO 37.9 kW (50.8 hp) at 611 rpm12.80 L/h 3.38 gal/h
Standard PTO speedPTO 35.2 kW (47.2 hp) at 538 rpm12.23 L/h 3.23 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1814

Common questions about the Hürlimann XN-706

Is a XN-706 two-wheel drive or four-wheel drive?

The Hürlimann XN-706 is four-wheel drive (4WD).

What PTO does a XN-706 have?

A XN-706 has a 540 rpm / 1000 rpm rear PTO on a 1 3/8" - 6 splines shaft.

Sources and how this page was built

Compiled from OECD tractor test report 1814; Traktorenlexikon, “Hürlimann XA 606”; and Traktorenlexikon, “Hürlimann XN 706”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1/1 784: Hürlimann XA 606 VDT — Licence not stated by the publisher; facts cited, OECD-1784 · published 1998-09-30 · retrieved 2026-09-14. OECD; testing station ISMA, Treviglio, Italy. Original document
  2. OECD Code 2 test report 1/1 814: Hürlimann XN 706 — Licence not stated by the publisher; facts cited, OECD-1814 · published 1999-03-30 · retrieved 2026-09-14. OECD; testing station IMA, Torino, Italy. Original document
  3. OECD Code 2 test report 1/1 814: Lamborghini Agile 660 S — Licence not stated by the publisher; facts cited, OECD-1814 · published 1999-03-30 · retrieved 2026-09-14. OECD; testing station IMA, Torino, Italy. Original document
  4. Traktorenlexikon: Hürlimann XA 606 — CC BY-SA 4.0, WIKIBOOKS-TL-105154 · revision 896328. Wikibooks contributors (Traktorenlexikon). Original document
  5. Traktorenlexikon: Hürlimann XN 706 — CC BY-SA 4.0, WIKIBOOKS-TL-105240 · revision 1056207. Wikibooks contributors (Traktorenlexikon). Original document