• Row-crop, Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1959–1960
  • 333 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Güldner A 2 B Full specifications

Güldner 2 BS two-cylinder diesel. The manufacturer claimed 24.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

24.5 hp

18.3 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Güldner A 2 B”, claimed

Weight
3,219 lb
Top speed
11.6 mph

Güldner A 2 B specs: key facts

  • The Güldner A 2 B was built from 1959 to 1960.

  • The Güldner A 2 B has a claimed engine power (gross or net not stated) of 18.3 kW (24.5 hp); it has no measured PTO figure.

  • The Güldner A 2 B is two-wheel drive (2WD).

  • The Güldner A 2 B has a Güldner 2 BS engine, a 2-cylinder 1.84 L diesel unit.Source 2

  • The Güldner A 2 B weighs 1,460 kg (3,219 lb) unladen.

  • The Güldner A 2 B has a dependent rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Güldner A 2 B”

How much horsepower does an A 2 B have?

The only figure for the A 2 B is 24.5 hp (18.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
24.5 hp

Source · Traktorenlexikon, “Güldner A 2 B”

What engine is in an A 2 B?

An A 2 B has a Güldner 2 BS, a 2-cylinder 1.84 L diesel engine.

Engine — A 2 B engine specifications
Make & modelGüldner 2 BSSource 2
Cylinders2, liquid-cooledSource 2
Displacement112.3 ci · 1.84 LSource 2
Max torque72 lb·ft · 98 N·m @ 1,400 rpm
InjectionBosch injection pump
Electrical system12 V

Source · Traktorenlexikon, “Güldner A 2 B”

How much will an A 2 B lift?

Hydraulic and PTO specifications for the A 2 B are below.

Hydraulics & PTO — A 2 B hydraulics and PTO specifications
Pressure1,991 psi · 137 bar
Rear PTODependent, transmission-driven, 540 rpmGround-speed PTO available
PTO shaft29 x 34,9 x 8,7 mm

Source · Traktorenlexikon, “Güldner A 2 B”

What transmission does an A 2 B have?

Transmission specifications for the A 2 B are below.

Transmission — A 2 B transmission specifications
ClutchPedal-operated dry Fichtel & Sachs single-plate clutch
SteeringZF individual wheel steering
Top speed11.6 mph · 18.63 km/h

Source · Traktorenlexikon, “Güldner A 2 B”

How much does an A 2 B weigh?

An A 2 B weighs 3,219 lb (1,460 kg) unladen.

Weights & dimensions — A 2 B weights and dimensions
Unladen weight3,219 lb · 1,460 kg
Maximum permissible mass4,409 lb · 2,000 kg
Maximum front axle load1,543 lb · 700 kg
Maximum rear axle load3,527 lb · 1,600 kg
Wheelbase78.0 in · 1,980 mm
Length123.5 in · 3,138 mm
Width59.1 in · 1,500 mm
Height63.0 in · 1,600 mm
Ground clearance16.1 in · 410 mm
Front track49.6–59.4 in · 1,260–1,510 mm
Rear track49.2–59.1 in · 1,250–1,500 mm

Source · Traktorenlexikon, “Güldner A 2 B”

Everything else people ask

Is an A 2 B two-wheel drive or four-wheel drive?

The Güldner A 2 B is two-wheel drive (2WD).

What PTO does an A 2 B have?

An A 2 B has a dependent 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Güldner AB”; and Traktorenlexikon, “Güldner A 2 B”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Güldner A 2 BCC BY-SA 4.0, WIKIBOOKS-TL-43392 · revision 1078727. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Güldner ABCC BY-SA 4.0, WIKIBOOKS-TL-43378 · revision 1078723. Wikibooks contributors (Traktorenlexikon). Original document