- Articulated
- WhichTractor size: Standard-size
- Not independently tested
- 1977–1982
WhichTractor size, not the maker’s category
Ford FW-30 Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the FW-30.
Engine power, claimed · gross or net not stated
265.1 hp
197.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford FW-30”, claimed
What hydraulics does a FW-30 have?
Hydraulic and hitch specifications for the FW-30 are below.
| Pump flow | 20.0 gpm · 75.7 L/min |
|---|---|
| Rear remote valves | 4 |
| Three-point hitch category | Category 3 |
| Lift capacity 610 mm behind ends | 12,500 lb · 5,670 kg |
Source · Traktorenlexikon, “Ford FW-30”
What PTO does a FW-30 have?
A FW-30 has a 1000 rpm rear PTO.
| Rear PTO drive, optional | Engine-driven |
|---|---|
| Rear PTO independence, optional | Independent |
| PTO engages under load, optional | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 teilig |
| PTO power, claimed | 105.4 hp · 78.6 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Ford FW-30”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “Ford FW-30”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford FW-30 — CC BY-SA 4.0, WIKIBOOKS-TL-75530 · revision 934735. Wikibooks contributors (Traktorenlexikon). Original document