- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1991–1997
WhichTractor size, not the maker’s category
Ford 8240 (A) Hydraulics & PTO specs
14 hydraulics and PTO values on record for the 8240 (A).
Engine power, claimed · gross or net not stated
108.5 hp
80.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 8240”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an 8240 (A) have?
Hydraulic and hitch specifications for the 8240 (A) are below.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 21.1 gpm · 80.0 L/min |
| Steering pump flow | 9.6 gpm · 36.5 L/min |
| Hydraulic pressure | 2,582 psi · 178 bar |
| Rear remote valves, optional | 4 |
| Three-point hitch category | Category 2 |
| Lift capacity (point not stated) | 11,850 lb · 5,375 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Ford 8240”
What PTO does an 8240 (A) have?
An 8240 (A) has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Ford 8240”
Sources and how this page was built
14 hydraulics and PTO values from Traktorenlexikon, “Ford 8240”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 8240 — CC BY-SA 4.0, WIKIBOOKS-TL-91404 · revision 919932. Wikibooks contributors (Traktorenlexikon). Original document