- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1996–1998
WhichTractor size, not the maker’s category
Ford 4835 Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the 4835.
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 4835”, claimed
How much will a 4835 lift?
A 4835 lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pump flow | 11.8 gpm · 44.5 L/min |
|---|---|
| Hydraulic pressure | 2,103 psi · 145 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 6,393 lb · 2,900 kg |
| Hitch control | Lifting, lowering, float position, draft, position and mixed control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Ford 4835”
What PTO does a 4835 have?
A 4835 has a 540/540E/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/540E/1000 rpm |
| Engine speed at 540 PTO | 2,198 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 56.1 hp · 41.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Ford 4835”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Ford 4835”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 4835 — CC BY-SA 4.0, WIKIBOOKS-TL-110696 · revision 920823. Wikibooks contributors (Traktorenlexikon). Original document