- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1990–1992
WhichTractor size, not the maker’s category
Ford 4830 (A) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 4830 (A).
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 4830”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 4830 (A) lift?
A 4830 (A) lifts 4,381 lb (1,987 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 9.3 gpm · 35.3 L/min |
| Steering pump flow | 3.6 gpm · 13.6 L/min |
| Hydraulic pressure | 1,378–1,450 psi · 95–100 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 4,381 lb · 1,987 kg |
Source · Traktorenlexikon, “Ford 4830”
What PTO does a 4830 (A) have?
A 4830 (A) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,756 rpm |
Source · Traktorenlexikon, “Ford 4830”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Ford 4830”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 4830 — CC BY-SA 4.0, WIKIBOOKS-TL-91324 · revision 919082. Wikibooks contributors (Traktorenlexikon). Original document