- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1996–1998
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 4635 (A) Full specifications
Iveco 8035.05 three-cylinder diesel. The manufacturer claimed 59.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
59.3 hp
44.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 4635”, claimed
- Weight
- 8,686 lb
- 3-point lift
- 4,850 lb
- Hyd. flow
- 11.8 gpm
- Top speed
- 18.6–24.9 mph
Ford 4635 (A) specs: key facts
The Ford 4635 (A) was built from 1996 to 1998.
The Ford 4635 (A) has a claimed engine power (gross or net not stated) of 44.2 kW (59.3 hp); it has no measured PTO figure.
The Ford 4635 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Ford 4635 (A) has a Iveco 8035.05 engine, a 3-cylinder 2.93 L diesel unit.
The Ford 4635 (A) weighs 3,940 kg (8,686 lb) unladen.
The Ford 4635 (A) has an independent rear PTO running at 540/540E/1000 rpm.
The three-point hitch of the Ford 4635 (A) lifts 2,200 kg (4,850 lb) at the lower-link ends.
The hydraulic pump of the Ford 4635 (A) delivers 44.5 L/min (11.8 gpm).
Source · Traktorenlexikon, “Ford 4635”
How much horsepower does a 4635 (A) have?
The only figure for the 4635 (A) is 59.3 hp (44.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 4635”
What engine is in a 4635 (A)?
A 4635 (A) has an Iveco 8035.05, a 3-cylinder 2.93 L diesel engine.
| Make & model | Iveco 8035.05 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 178.9 ci · 2.93 L |
| Max torque | 138 lb·ft · 187 N·m @ 1,493 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 4635”
How much will a 4635 (A) lift, and what is its hydraulic flow?
A 4635 (A) lifts 4,850 lb (2,200 kg) at the lower-link ends.
| Pump flow | 11.8 gpm · 44.5 L/min |
|---|---|
| Pressure | 2,103 psi · 145 bar |
| Lift at ends | 4,850 lb · 2,200 kg |
| Rear PTO | Independent, engine-driven, 540/540E/1000 rpm @ 2,198 engine rpmEngages under loadGround-speed PTO available |
Source · Traktorenlexikon, “Ford 4635”
What transmission does a 4635 (A) have?
Transmission specifications for the 4635 (A) are below.
| Clutch | Dry LuK double clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering with one double-acting steering cylinder and separate circuit |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Ford 4635”
How much does a 4635 (A) weigh?
A 4635 (A) weighs 8,686 lb (3,940 kg) unladen.
| Unladen weight | 8,686 lb · 3,940 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 11,464 lb · 5,200 kg |
| Wheelbase | 92.2 in · 2,342 mmtwo-wheel-drive version |
| Length | 153.9 in · 3,910 mmtwo-wheel-drive version |
| Width | 83.5 in · 2,120 mm |
| Height | 98.4 in · 2,500 mm |
| Ground clearance | 18.9 in · 480 mmtwo-wheel-drive version |
| Front track | 55.1–85.4 in · 1,400–2,170 mmtwo-wheel-drive version |
| Rear track | 55.9–86.8 in · 1,420–2,205 mm |
| Turning radius, braked | 12.4 ft · 3.79 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Ford 4635”
Which tractors compare with a 4635 (A)?
Within 10% of its 50.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Massey Ferguson MF 363 (A)50.3 hp PTO, claimed · 1987–1994Side by side with the 4635 (A) →
- ZETOR 6211/624550.3 hp PTO, claimed · 1984–1993Side by side with the 4635 (A) →
- Renault Ceres 65/II50.2 hp PTO, claimed · 1994–1998Side by side with the 4635 (A) →
- VALMET 405 (405/4)50.2 hp PTO, claimed · 1985–1989Side by side with the 4635 (A) →
- VOLVO-BM-VALMET 405 (405/4)50.2 hp PTO, claimed · 1985Side by side with the 4635 (A) →
- IMT 569 De Luxe50.1 hp PTO, claimed · 1986–1996Side by side with the 4635 (A) →
Everything else people ask
Is a 4635 (A) two-wheel drive or four-wheel drive?
The Ford 4635 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 4635 (A) have?
A 4635 (A) has a independent 540/540E/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Ford 4635”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 4635 — CC BY-SA 4.0, WIKIBOOKS-TL-110695 · revision 920821. Wikibooks contributors (Traktorenlexikon). Original document