- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1981–1993
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 3600 (A) Full specifications
The manufacturer claimed 46.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
46.4 hp
34.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 3600”, claimed
- Weight
- 3,990 lb
- 3-point lift
- 2,800 lb
- Hyd. flow
- 8.3 gpm
- Top speed
- 18.6 mph
Ford 3600 (A) specs: key facts
The Ford 3600 (A) was built from 1981 to 1993.
The Ford 3600 (A) has a claimed engine power (gross or net not stated) of 34.6 kW (46.4 hp); it has no measured PTO figure.
The Ford 3600 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Ford 3600 (A) weighs 1,810 kg (3,990 lb) unladen.
The Ford 3600 (A) has an independent rear PTO running at 540 rpm.
The three-point hitch of the Ford 3600 (A) lifts 1,270 kg (2,800 lb) at the lower-link ends.
The hydraulic pump of the Ford 3600 (A) delivers 31.4 L/min (8.3 gpm).
Source · Traktorenlexikon, “Ford 3600”
How much horsepower does a 3600 (A) have?
The only figure for the 3600 (A) is 46.4 hp (34.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 3600”
How much will a 3600 (A) lift, and what is its hydraulic flow?
A 3600 (A) lifts 2,800 lb (1,270 kg) at the lower-link ends.
| Pump flow | 8.3 gpm · 31.4 L/min |
|---|---|
| Lift at ends | 2,800 lb · 1,270 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,811 engine rpm |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Ford 3600”
What transmission does a 3600 (A) have?
Transmission specifications for the 3600 (A) are below.
| Clutch | Pedal-operated dry Borg & Beck double clutch |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Ford 3600”
How much does a 3600 (A) weigh?
A 3600 (A) weighs 3,990 lb (1,810 kg) unladen.
| Unladen weight | 3,990 lb · 1,810 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 75.9 in · 1,927 mm |
| Length | 127.2 in · 3,232 mm |
| Width | 66.7 in · 1,695 mm |
| Height | 89.4 in · 2,270 mm |
| Ground clearance | 22.6 in · 575 mm |
| Front track | 48.5–80.5 in · 1,232–2,045 mm |
| Rear track | 52.5–76.5 in · 1,334–1,944 mm |
| Turning radius, braked | 9.9 ft · 3.01 m |
Source · Traktorenlexikon, “Ford 3600”
Which tractors compare with a 3600 (A)?
Within 10% of its 38.9 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VALMET 205/205-438.9 hp PTO, claimed · 1989–1991Side by side with the 3600 (A) →
- ZETOR 491139.0 hp PTO, claimed · 1977–1980Side by side with the 3600 (A) →
- IMT 549 (DV-E)38.7 hp PTO, claimed · 1986–1996Side by side with the 3600 (A) →
- J.I. Case 119038.6 hp PTO, claimed · 1980–1983Side by side with the 3600 (A) →
- David Brown 119438.6 hp PTO, claimed · 1984–1985Side by side with the 3600 (A) →
- J.I. Case 119438.6 hp PTO, claimed · 1984–1985Side by side with the 3600 (A) →
Everything else people ask
Is a 3600 (A) two-wheel drive or four-wheel drive?
The Ford 3600 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 3600 (A) have?
A 3600 (A) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Ford 3600”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 3600 — CC BY-SA 4.0, WIKIBOOKS-TL-90194 · revision 1086054. Wikibooks contributors (Traktorenlexikon). Original document