- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1984–1991
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fiat 80-66 S (DT) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 80-66 S (DT).
Engine power, claimed · gross or net not stated
79.0 hp
58.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 80-66/80-66 DT”, claimed
How much will an 80-66 S (DT) lift?
An 80-66 S (DT) lifts 7,055 lb (3,200 kg) at the lower-link ends.
| Pump flow | 8.7 gpm · 32.8 L/min |
|---|---|
| Steering pump flow | 7.0 gpm · 26.4 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 7,055 lb · 3,200 kg |
| Lift capacity 610 mm behind ends | 5,838 lb · 2,648 kg |
Source · Traktorenlexikon, “Fiat 80-66/80-66 DT”
What PTO does an 80-66 S (DT) have?
An 80-66 S (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,199 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Fiat 80-66/80-66 DT”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Fiat 80-66/80-66 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 80-66/80-66 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108667 · revision 1075604. Wikibooks contributors (Traktorenlexikon). Original document