- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1984–1991
WhichTractor size, not the maker’s category
Fiat 70-66 (DT) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 70-66 (DT).
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 70-66/70-66 DT”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 70-66 (DT) lift?
A 70-66 (DT) lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pump flow | 8.7 gpm · 32.8 L/min |
|---|---|
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 6,393 lb · 2,900 kg |
| Lift capacity 610 mm behind ends | 5,838 lb · 2,648 kg |
| Hitch control | lifting, lowering, floating position, draft, mixed and position control |
Source · Traktorenlexikon, “Fiat 70-66/70-66 DT”
What PTO does a 70-66 (DT) have?
A 70-66 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,199 rpm |
Source · Traktorenlexikon, “Fiat 70-66/70-66 DT”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Fiat 70-66/70-66 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 70-66/70-66 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108657 · revision 1075563. Wikibooks contributors (Traktorenlexikon). Original document