- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1993–1996
WhichTractor size, not the maker’s category
Fiat 65-94 DT Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the 65-94 DT.
How much will a 65-94 DT lift?
A 65-94 DT lifts 6,393 lb (2,900 kg) at the lower-link ends.
| Pump flow | 10.3 gpm · 39.0 L/min |
|---|---|
| Hydraulic pressure | 3,263–3,408 psi · 225–235 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 6,393 lb · 2,900 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fiatagri 65-94”
What PTO does a 65-94 DT have?
A 65-94 DT has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,198 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 57.1 hp · 42.6 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fiatagri 65-94”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Fiatagri 65-94”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri 65-94 — CC BY-SA 4.0, WIKIBOOKS-TL-108905 · revision 1010792. Wikibooks contributors (Traktorenlexikon). Original document