- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- from 1988
WhichTractor size, not the maker’s category
Fiat 65-56 LM (DT) Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the 65-56 LM (DT).
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiatagri 65-56 LM (DT)”, claimed
How much will a 65-56 LM (DT) lift?
A 65-56 LM (DT) lifts 3,847 lb (1,745 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 8.7 gpm · 32.8 L/min |
| Steering pump flow | 6.0 gpm · 22.8 L/min |
| Hydraulic pressure | 3,046 psi · 210 bar |
| Lift capacity at ball ends | 3,847 lb · 1,745 kg |
| Hitch control | Lifting, lowering, floating position, draft, mixed and position control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fiatagri 65-56 LM (DT)”
What PTO does a 65-56 LM (DT) have?
A 65-56 LM (DT) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,967 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 53.5 hp · 39.9 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fiatagri 65-56 LM (DT)”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “Fiatagri 65-56 LM (DT)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri 65-56 LM (DT) — CC BY-SA 4.0, WIKIBOOKS-TL-108899 · revision 990900. Wikibooks contributors (Traktorenlexikon). Original document