WhichTractor
  • Crawler
  • WhichTractor size: Utility
  • Not independently tested
  • 1968–1975

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 605 C Full specifications

FIAT-IVECO 8045.02.211 or 311 four-cylinder diesel. The manufacturer claimed 52.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

52.3 hp

39.0 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 605 C”, claimed

Weight
6,063 lb
Hyd. flow
4.3 gpm
Top speed
6.8 mph

Fiat 605 C specs: key facts

  • The Fiat 605 C was built from 1968 to 1975.

  • The Fiat 605 C has a claimed engine power (gross or net not stated) of 39.0 kW (52.3 hp); it has no measured PTO figure.

  • The Fiat 605 C is a tracked machine.

  • The Fiat 605 C has a FIAT-IVECO 8045.02.211 or 311 engine, a 4-cylinder 3.46 L diesel unit.

  • The Fiat 605 C weighs 2,750 kg (6,063 lb) unladen.

  • The Fiat 605 C has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 605 C delivers 16.3 L/min (4.3 gpm).

Source · Traktorenlexikon, “Fiat 605 C”

How much horsepower does a 605 C have?

The only figure for the 605 C is 52.3 hp (39.0 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
52.3 hp

Source · Traktorenlexikon, “Fiat 605 C”

What engine is in a 605 C?

A 605 C has a FIAT-IVECO 8045.02.211 or 311, a 4-cylinder 3.46 L diesel engine.

Engine — 605 C engine specifications
Make & modelFIAT-IVECO 8045.02.211 or 311
Cylinders4, liquid-cooled
Displacement210.9 ci · 3.46 L
Electrical system12 V

Source · Traktorenlexikon, “Fiat 605 C”

How much will a 605 C lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 605 C are below.

Hydraulics & PTO — 605 C hydraulics and PTO specifications
Pump flow4.3 gpm · 16.3 L/min
Pressure2,843 psi · 196 bar
Hitch categoryCategory 1
Rear PTO540 rpm @ 1,970 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Fiat 605 C”

What transmission does a 605 C have?

Transmission specifications for the 605 C are below.

Transmission — 605 C transmission specifications
ClutchHand lever operated dry double clutch with dead center engagement
Top speed6.8 mph · 11 km/h

Source · Traktorenlexikon, “Fiat 605 C”

How much does a 605 C weigh?

A 605 C weighs 6,063 lb (2,750 kg) unladen.

Weights & dimensions — 605 C weights and dimensions
Unladen weight6,063 lb · 2,750 kg
Wheelbase60.2 in · 1,528 mm
Length109.6 in · 2,785 mm
Width56.7 in · 1,440 mm
Height48.4 in · 1,230 mm
Ground clearance10.6 in · 270 mm
Front track43.3 in · 1,100 mmWikibooks gives one track for both axles
Rear track43.3 in · 1,100 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 605 C”

Everything else people ask

Is a 605 C two-wheel drive or four-wheel drive?

The Fiat 605 C is a tracked machine.

What PTO does a 605 C have?

A 605 C has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 605 C”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 605 C — CC BY-SA 4.0, WIKIBOOKS-TL-121935 · revision 1076583. Wikibooks contributors (Traktorenlexikon). Original document