- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1984–1988
WhichTractor size, not the maker’s category
Fiat 60-66 (DT) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 60-66 (DT).
Engine power, claimed · gross or net not stated
59.3 hp
44.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 60-66/60-66 DT”, claimed
How much will a 60-66 (DT) lift?
A 60-66 (DT) lifts 5,194 lb (2,356 kg) at the lower-link ends.
| Pump flow | 8.7 gpm · 32.8 L/min |
|---|---|
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 3 |
| Lift capacity at ball ends | 5,194 lb · 2,356 kg |
| Lift capacity 610 mm behind ends | 4,982 lb · 2,260 kg |
| Hitch control | Lifting, lowering, floating position, draft, mixed and position control |
Source · Traktorenlexikon, “Fiat 60-66/60-66 DT”
What PTO does a 60-66 (DT) have?
A 60-66 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,199 rpm |
| PTO power, claimed | 51.4 hp · 38.3 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fiat 60-66/60-66 DT”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Fiat 60-66/60-66 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 60-66/60-66 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108641 · revision 1075439. Wikibooks contributors (Traktorenlexikon). Original document