WhichTractor
  • Crawler
  • WhichTractor size: Utility
  • Not independently tested
  • 1968–1975

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 505 C Full specifications

FIAT-IVECO 8035.02.372 three-cylinder diesel. The manufacturer claimed 48.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

48.3 hp

36.0 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 505 C”, claimed

Weight
5,512 lb
Hyd. flow
5.1 gpm
Top speed
6.8 mph

Fiat 505 C specs: key facts

  • The Fiat 505 C was built from 1968 to 1975.

  • The Fiat 505 C has a claimed engine power (gross or net not stated) of 36.0 kW (48.3 hp); it has no measured PTO figure.

  • The Fiat 505 C is a tracked machine.

  • The Fiat 505 C has a FIAT-IVECO 8035.02.372 engine, a 3-cylinder 2.59 L diesel unit.

  • The Fiat 505 C weighs 2,500 kg (5,512 lb) unladen.

  • The Fiat 505 C has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 505 C delivers 19.3 L/min (5.1 gpm).

Source · Traktorenlexikon, “Fiat 505 C”

How much horsepower does a 505 C have?

The only figure for the 505 C is 48.3 hp (36.0 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
48.3 hp

Source · Traktorenlexikon, “Fiat 505 C”

What engine is in a 505 C?

A 505 C has a FIAT-IVECO 8035.02.372, a 3-cylinder 2.59 L diesel engine.

Engine — 505 C engine specifications
Make & modelFIAT-IVECO 8035.02.372
Cylinders3, liquid-cooled
Displacement158.2 ci · 2.59 L
Max torque118 lb·ft · 160 N·m @ 1,500 rpm
Electrical system12 V

Source · Traktorenlexikon, “Fiat 505 C”

How much will a 505 C lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 505 C are below.

Hydraulics & PTO — 505 C hydraulics and PTO specifications
Pump flow5.1 gpm · 19.3 L/min
Pressure2,843 psi · 196 bar
Hitch categoryCategory 1
Rear PTO540 rpm @ 2,160 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Fiat 505 C”

What transmission does a 505 C have?

Transmission specifications for the 505 C are below.

Transmission — 505 C transmission specifications
ClutchHand lever operated dry single plate clutch with dead center engagement
Top speed6.8 mph · 11 km/h

Source · Traktorenlexikon, “Fiat 505 C”

How much does a 505 C weigh?

A 505 C weighs 5,512 lb (2,500 kg) unladen.

Weights & dimensions — 505 C weights and dimensions
Unladen weight5,512 lb · 2,500 kg
Wheelbase51.9 in · 1,318 mm
Length105.3 in · 2,675 mm
Width56.7 in · 1,440 mm
Height48.4 in · 1,230 mm
Ground clearance10.6 in · 270 mm
Front track43.3 in · 1,100 mmWikibooks gives one track for both axles
Rear track43.3 in · 1,100 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 505 C”

Everything else people ask

Is a 505 C two-wheel drive or four-wheel drive?

The Fiat 505 C is a tracked machine.

What PTO does a 505 C have?

A 505 C has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 505 C”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 505 C — CC BY-SA 4.0, WIKIBOOKS-TL-121934 · revision 1076582. Wikibooks contributors (Traktorenlexikon). Original document