- WhichTractor size: Utility
- Not independently tested
- 1968–1975
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fiat 450 (DT) Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 450 (DT).
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 450/450 DT”, claimed
What hydraulics does a 450 (DT) have?
Hydraulic and hitch specifications for the 450 (DT) are below.
| Pump flow | 5.8 gpm · 21.8 L/min |
|---|---|
| Hydraulic pressure | 2,843 psi · 196 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 1 |
| Hitch control | Lifting, lowering, floating position, draft and position control |
Source · Traktorenlexikon, “Fiat 450/450 DT”
What PTO does a 450 (DT) have?
A 450 (DT) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,967 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Fiat 450/450 DT”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Fiat 450/450 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 450/450 DT — CC BY-SA 4.0, WIKIBOOKS-TL-57411 · revision 1073704. Wikibooks contributors (Traktorenlexikon). Original document