- Crawler
- WhichTractor size: Standard-size
- Not independently tested
- from 1953
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat 45 C (CS) Full specifications
O.M.-FIAT CO 1D-45 four-cylinder diesel.
- Weight
- 8,444 lb
- 3-point lift
- 1,764 lb
- Top speed
- 6.8 mph
Fiat 45 C (CS) specs: key facts
The Fiat 45 C (CS) was first built in 1953.
The Fiat 45 C (CS) is a tracked machine.
The Fiat 45 C (CS) has a O.M.-FIAT CO 1D-45 engine, a 4-cylinder 4.16 L diesel unit.Source 2
The Fiat 45 C (CS) weighs 3,830 kg (8,444 lb) unladen.
The Fiat 45 C (CS) has a rear PTO running at 540 rpm.
The three-point hitch of the Fiat 45 C (CS) lifts 800 kg (1,764 lb) at the lower-link ends.
Source · Traktorenlexikon, “Fiat 45 C”
How much horsepower does a 45 C (CS) have?
No sourced power figure for the 45 C (CS) is on record yet.
What engine is in a 45 C (CS)?
A 45 C (CS) has an O.M.-FIAT CO 1D-45, a 4-cylinder 4.16 L diesel engine.
| Make & model | O.M.-FIAT CO 1D-45Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 253.6 ci · 4.16 LSource 2 |
| Max torque | 167 lb·ft · 226 N·m @ 1,000 rpm |
| Electrical system | 24 V |
Source · Traktorenlexikon, “Fiat 45 C”
How much will a 45 C (CS) lift?
A 45 C (CS) lifts 1,764 lb (800 kg) at the lower-link ends.
| Lift at ends | 1,764 lb · 800 kg |
|---|---|
| Rear PTO | 540 rpm @ 1,470 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Fiat 45 C”
What transmission does a 45 C (CS) have?
Transmission specifications for the 45 C (CS) are below.
| Top speed | 6.8 mph · 11 km/h |
|---|
Source · Traktorenlexikon, “Fiat 45 C”
How much does a 45 C (CS) weigh?
A 45 C (CS) weighs 8,444 lb (3,830 kg) unladen.
| Unladen weight | 8,444 lb · 3,830 kgCI: 3,920 |
|---|---|
| Wheelbase | 59.4 in · 1,510 mmCI: 1,530 |
| Length | 105.9 in · 2,690 mm |
| Width | 68.9 in · 1,750 mm |
| Height | 58.3 in · 1,480 mm |
| Ground clearance | 14.0 in · 355 mm |
| Front track | 53.1 in · 1,350 mmWikibooks gives one track for both axles |
| Rear track | 53.1 in · 1,350 mmWikibooks gives one track for both axles |
Source · Traktorenlexikon, “Fiat 45 C”
Everything else people ask
Is a 45 C (CS) two-wheel drive or four-wheel drive?
The Fiat 45 C (CS) is a tracked machine.
What PTO does a 45 C (CS) have?
A 45 C (CS) has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Someca SOM 40 B”; and Traktorenlexikon, “Fiat 45 C”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 45 C — CC BY-SA 4.0, WIKIBOOKS-TL-121909 · revision 1076247. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Someca SOM 40 B — CC BY-SA 4.0, WIKIBOOKS-TL-121064 · revision 1061770. Wikibooks contributors (Traktorenlexikon). Original document