WhichTractor
  • Vehicle type: unspecified
  • Crawler
  • WhichTractor size: Compact
  • Not independently tested
  • 1964–1965

It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fiat 352 C Full specifications

FIAT 605 D.000 four-cylinder diesel. The manufacturer claimed 29.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

29.6 hp

22.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 352-C”, claimed

Weight
4,189 lb
Hyd. flow
4.4 gpm
Top speed
5.6 mph

Fiat 352 C specs: key facts

  • The Fiat 352 C was built from 1964 to 1965.

  • The Fiat 352 C has a claimed engine power (gross or net not stated) of 22.1 kW (29.6 hp); it has no measured PTO figure.

  • The Fiat 352 C is a tracked machine.

  • The Fiat 352 C has a FIAT 605 D.000 engine, a 4-cylinder 1.90 L diesel unit.Source 1

  • The Fiat 352 C weighs 1,900 kg (4,189 lb) unladen.

  • The Fiat 352 C has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 352 C delivers 16.5 L/min (4.4 gpm).

Source · Traktorenlexikon, “Fiat 352-C”

How much horsepower does a 352 C have?

The only figure for the 352 C is 29.6 hp (22.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
29.6 hp

Source · Traktorenlexikon, “Fiat 352-C”

What engine is in a 352 C?

A 352 C has an FIAT 605 D.000, a 4-cylinder 1.90 L diesel engine.

Engine — 352 C engine specifications
Make & modelFIAT 605 D.000
Cylinders4, liquid-cooledSource 2
Displacement116.0 ci · 1.90 L
Max torque74 lb·ft · 101 N·m @ 1,600 rpmSource 2
Electrical system24 VSource 2

Source · Traktorenlexikon, “Fiat 311-C”

How much will a 352 C lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 352 C are below.

Hydraulics & PTO — 352 C hydraulics and PTO specifications
Pump flow4.4 gpm · 16.5 L/min
Pressure2,843 psi · 196 bar
Rear PTO540 rpm

Source · Traktorenlexikon, “Fiat 352-C”

What transmission does a 352 C have?

Transmission specifications for the 352 C are below.

Transmission — 352 C transmission specifications
Top speed5.6 mph · 9.0 km/h

Source · Traktorenlexikon, “Fiat 352-C”

How much does a 352 C weigh?

A 352 C weighs 4,189 lb (1,900 kg) unladen.

Weights & dimensions — 352 C weights and dimensions
Unladen weight4,189 lb · 1,900 kg
Wheelbase48.2 in · 1,225 mm
Length98.8 in · 2,510 mm
Width60.2 in · 1,530 mm
Height48.2 in · 1,225 mm
Ground clearance10.4 in · 265 mm
Front track49.2 in · 1,250 mmWikibooks gives one track for both axles
Rear track49.2 in · 1,250 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 352-C”

Everything else people ask

Is a 352 C two-wheel drive or four-wheel drive?

The Fiat 352 C is a tracked machine.

What PTO does a 352 C have?

A 352 C has a 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 311-C”; and Traktorenlexikon, “Fiat 352-C”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 311-C — CC BY-SA 4.0, WIKIBOOKS-TL-121922 · revision 1076465. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fiat 352-C — CC BY-SA 4.0, WIKIBOOKS-TL-121927 · revision 1076470. Wikibooks contributors (Traktorenlexikon). Original document