WhichTractor
  • Vehicle type: unspecified
  • Crawler
  • WhichTractor size: Compact
  • Not independently tested
  • 1964–1965

It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fiat 312 C Full specifications

FIAT 605 D.000 four-cylinder diesel. The manufacturer claimed 29.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

29.6 hp

22.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 312-C”, claimed

Weight
4,079 lb
Hyd. flow
4.4 gpm
Top speed
5.6 mph

Fiat 312 C specs: key facts

  • The Fiat 312 C was built from 1964 to 1965.

  • The Fiat 312 C has a claimed engine power (gross or net not stated) of 22.1 kW (29.6 hp); it has no measured PTO figure.

  • The Fiat 312 C is a tracked machine.

  • The Fiat 312 C has a FIAT 605 D.000 engine, a 4-cylinder 1.90 L diesel unit.Source 1

  • The Fiat 312 C weighs 1,850 kg (4,079 lb) unladen.

  • The Fiat 312 C has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 312 C delivers 16.5 L/min (4.4 gpm).

Source · Traktorenlexikon, “Fiat 312-C”

How much horsepower does a 312 C have?

The only figure for the 312 C is 29.6 hp (22.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
29.6 hp

Source · Traktorenlexikon, “Fiat 312-C”

What engine is in a 312 C?

A 312 C has an FIAT 605 D.000, a 4-cylinder 1.90 L diesel engine.

Engine — 312 C engine specifications
Make & modelFIAT 605 D.000
Cylinders4, liquid-cooledSource 2
Displacement116.0 ci · 1.90 L
Max torque74 lb·ft · 101 N·m @ 1,600 rpmSource 2
Electrical system24 VSource 2

Source · Traktorenlexikon, “Fiat 311-C”

How much will a 312 C lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 312 C are below.

Hydraulics & PTO — 312 C hydraulics and PTO specifications
Pump flow4.4 gpm · 16.5 L/min
Pressure2,843 psi · 196 bar
Rear PTO540 rpm

Source · Traktorenlexikon, “Fiat 312-C”

What transmission does a 312 C have?

Transmission specifications for the 312 C are below.

Transmission — 312 C transmission specifications
BrakesPedal-operated Ferodo drum band brake acting on outer drums of steering clutches
Top speed5.6 mph · 9.0 km/h

Source · Traktorenlexikon, “Fiat 312-C”

How much does a 312 C weigh?

A 312 C weighs 4,079 lb (1,850 kg) unladen.

Weights & dimensions — 312 C weights and dimensions
Unladen weight4,079 lb · 1,850 kg
Wheelbase48.2 in · 1,225 mm
Length98.8 in · 2,510 mm
Width50.8 in · 1,290 mm
Height48.2 in · 1,225 mm
Ground clearance10.8 in · 275 mm
Front track39.8 in · 1,010 mmWikibooks gives one track for both axles
Rear track39.8 in · 1,010 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 312-C”

Everything else people ask

Is a 312 C two-wheel drive or four-wheel drive?

The Fiat 312 C is a tracked machine.

What PTO does a 312 C have?

A 312 C has a 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 311-C”; and Traktorenlexikon, “Fiat 312-C”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 311-C — CC BY-SA 4.0, WIKIBOOKS-TL-121922 · revision 1076465. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fiat 312-C — CC BY-SA 4.0, WIKIBOOKS-TL-121925 · revision 1076468. Wikibooks contributors (Traktorenlexikon). Original document