WhichTractor
  • Crawler
  • WhichTractor size: Utility
  • Not independently tested
  • 1953–1956

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 25 C (CS/CI) Full specifications

FIAT-O.M. 605.000 four-cylinder diesel. The manufacturer claimed 24.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

24.7 hp

18.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 25 C”, claimed

Weight
3,803 lb
Hyd. flow
4.0 gpm
Top speed
6.8 mph

Fiat 25 C (CS/CI) specs: key facts

  • The Fiat 25 C (CS/CI) was built from 1953 to 1956.

  • The Fiat 25 C (CS/CI) has a claimed engine power (gross or net not stated) of 18.4 kW (24.7 hp); it has no measured PTO figure.

  • The Fiat 25 C (CS/CI) is a tracked machine.

  • The Fiat 25 C (CS/CI) has a FIAT-O.M. 605.000 engine, a 4-cylinder 1.90 L diesel unit.

  • The Fiat 25 C (CS/CI) weighs 1,725 kg (3,803 lb) unladen.

  • The Fiat 25 C (CS/CI) has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the Fiat 25 C (CS/CI) delivers 15.0 L/min (4.0 gpm).

Source · Traktorenlexikon, “Fiat 25 C”

How much horsepower does a 25 C (CS/CI) have?

The only figure for the 25 C (CS/CI) is 24.7 hp (18.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
24.7 hp

Source · Traktorenlexikon, “Fiat 25 C”

What engine is in a 25 C (CS/CI)?

A 25 C (CS/CI) has a FIAT-O.M. 605.000, a 4-cylinder 1.90 L diesel engine.

Engine — 25 C (CS/CI) engine specifications
Make & modelFIAT-O.M. 605.000
Cylinders4, liquid-cooled
Displacement116.0 ci · 1.90 L
Max torque69 lb·ft · 94 N·m @ 1,200 rpm
Electrical system24 V

Source · Traktorenlexikon, “Fiat 25 C”

How much will a 25 C (CS/CI) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 25 C (CS/CI) are below.

Hydraulics & PTO — 25 C (CS/CI) hydraulics and PTO specifications
Pump flow4.0 gpm · 15.0 L/min
Rear PTODependent, transmission-driven, 540 rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Fiat 25 C”

What transmission does a 25 C (CS/CI) have?

Transmission specifications for the 25 C (CS/CI) are below.

Transmission — 25 C (CS/CI) transmission specifications
Clutchhand lever operated dry single plate clutch with dead center clutch
Top speed6.8 mph · 11 km/h

Source · Traktorenlexikon, “Fiat 25 C”

How much does a 25 C (CS/CI) weigh?

A 25 C (CS/CI) weighs 3,803 lb (1,725 kg) unladen.

Weights & dimensions — 25 C (CS/CI) weights and dimensions
Unladen weight3,803 lb · 1,725 kg
Wheelbase48.2 in · 1,225 mm
Length86.4 in · 2,195 mm
Width48.0 in · 1,220 mm
Height47.0 in · 1,195 mm
Ground clearance10.4 in · 265 mm
Front track37.8 in · 960 mmWikibooks gives one track for both axles
Rear track37.8 in · 960 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fiat 25 C”

Everything else people ask

Is a 25 C (CS/CI) two-wheel drive or four-wheel drive?

The Fiat 25 C (CS/CI) is a tracked machine.

What PTO does a 25 C (CS/CI) have?

A 25 C (CS/CI) has a dependent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 25 C”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 25 C — CC BY-SA 4.0, WIKIBOOKS-TL-121908 · revision 1076216. Wikibooks contributors (Traktorenlexikon). Original document