- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1984–1994
WhichTractor size, not the maker’s category
Fiat 160-90 (DT) Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the 160-90 (DT).
Engine power, claimed · gross or net not stated
158.0 hp
117.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiatagri 160-90 DT”, claimed
How much will a 160-90 (DT) lift?
A 160-90 (DT) lifts 5,512 lb (2,500 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 13.4 gpm · 50.8 L/min |
| Steering pump flow | 5.0 gpm · 19.0 L/min |
| Hydraulic pressure | 3,046–3,118 psi · 210–215 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 5,512 lb · 2,500 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fiatagri 160-90 DT”
What PTO does a 160-90 (DT) have?
A 160-90 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,952 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 136.8 hp · 102.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fiatagri 160-90 DT”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “Fiatagri 160-90 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiatagri 160-90 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108786 · revision 1081825. Wikibooks contributors (Traktorenlexikon). Original document