- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1979–1984
It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Fiat 1380 (DT) Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the 1380 (DT).
Engine power, claimed · gross or net not stated
133.3 hp
99.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 1380 (DT)”, claimed
How much will a 1380 (DT) lift?
A 1380 (DT) lifts 10,878 lb (4,934 kg) at the lower-link ends.
| Pump flow | 14.1 gpm · 53.5 L/min |
|---|---|
| Steering pump flow | 4.6 gpm · 17.3 L/min |
| Hydraulic pressure | 3,336–3,481 psi · 230–240 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 10,878 lb · 4,934 kg |
| Lift capacity 610 mm behind ends | 6,393 lb · 2,900 kg |
| Hitch control | lifting, lowering, floating position, draft, mixed and position control |
Source · Traktorenlexikon, “Fiat 1380 (DT)”
What PTO does a 1380 (DT) have?
A 1380 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,096 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 parts |
| PTO power, claimed | 119.1 hp · 88.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fiat 1380 (DT)”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Fiat 1380 (DT)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 1380 (DT) — CC BY-SA 4.0, WIKIBOOKS-TL-108515 · revision 1075141. Wikibooks contributors (Traktorenlexikon). Original document