- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×1
- from 1999
- 3,160 built
WhichTractor size, not the maker’s category
Fendt Favorit 712 Vario Hydraulics & PTO specifications
20 hydraulics and PTO values on record for the Favorit 712 Vario.
Engine power, claimed · gross or net not stated
122.7 hp
91.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Favorit 712 Vario”, claimed
What hydraulics does a Favorit 712 Vario have?
Hydraulic and hitch specifications for the Favorit 712 Vario are below.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Pump flow | 20.7 gpm · 78.5 L/min |
| Hydraulic pressure | 2,466 psi · 170 bar |
| Rear remote valves | 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fendt Favorit 712 Vario”
What PTO does a Favorit 712 Vario have?
A Favorit 712 Vario has a 540/750/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540/750/1000 rpm |
| Engine speed at 540 PTO | 1,932 rpm |
| Rear PTO shaft | 35 mm, 6 splinesSource 1 |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Fendt Favorit 712 Vario”
How much power does a Favorit 712 Vario deliver at the PTO?
On OECD Test 1943, the Favorit 712 Vario delivered 131.0 hp (97.7 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 131.0 hp · 97.7 kWAt 947 PTO rpmAt 1,802 engine rpm |
|---|---|
| PTO power, at rated engine speed | 119.6 hp · 89.2 kWAt 1,104 PTO rpmAt 2,101 engine rpm |
| PTO power, at standard PTO speed | 128.6 hp · 95.9 kWAt 1,000 PTO rpmAt 1,903 engine rpm |
| PTO shaft speed, at maximum power | 947 rpm |
| PTO shaft speed, at rated engine speed | 1,104 rpm |
| PTO shaft speed, at standard PTO speed | 1,000 rpm |
| Hydraulic power, at maximum power | 29.5 hp · 22.0 kW |
| Hydraulic pump delivery, at maximum power | 20.5 gpm · 77.7 L/min |
| Three-point lift force | 12,005 lbf · 53.4 kN |
Source · OECD test report 1943, 2000
Where this page comes from
20 hydraulics and PTO values from OECD test report 1943, 2000; and Traktorenlexikon, “Fendt Favorit 712 Vario”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 943: Fendt Favorit 712 Vario — Licence not stated by the publisher; facts cited, OECD-1943 · published 2000-11-30 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
- Traktorenlexikon: Fendt Favorit 712 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-83008 · revision 990779. Wikibooks contributors (Traktorenlexikon). Original document