- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1988–1996
- 178 built
WhichTractor size, not the maker’s category
Fendt Farmer 275 S/SA Hydraulics & PTO specs
11 hydraulics and PTO values on record for the Farmer 275 S/SA.
Engine power, claimed · gross or net not stated
74 hp
55 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 275 S/SA”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a Farmer 275 S/SA have?
Hydraulic and hitch specifications for the Farmer 275 S/SA are below.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 10.9 gpm · 41.1 L/min |
| Hydraulic pressure | 2,408 psi · 166 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fendt Farmer 275 S/SA”
What PTO does a Farmer 275 S/SA have?
A Farmer 275 S/SA has a 540/750 rpm rear PTO.
| Rear PTO speeds | 540/750 rpm |
|---|---|
| Engine speed at 540 PTO | 2,104 rpm |
| Rear PTO shaft | 1 3/8"-6 splines |
| Front PTO available, optional | Yes |
| PTO power, claimed | 62.4 hp · 46.6 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fendt Farmer 275 S/SA”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Fendt Farmer 275 S/SA”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt Farmer 275 S/SA — CC BY-SA 4.0, WIKIBOOKS-TL-98545 · revision 1071934. Wikibooks contributors (Traktorenlexikon). Original document