- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: High-power
- No lab test on file
- from 2010
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Fendt 939 Vario specs: hp, weight, years
- Weight
- 23,876 lb
- Hyd. flow
- 42.3 gpm
- Top speed
- 37.3 mph
Fendt 939 Vario specs: key facts
The Fendt 939 Vario was first built in 2010.
The Fendt 939 Vario is four-wheel drive (4WD).
The Fendt 939 Vario weighs 10,830 kg (23,876 lb) unladen.
The Fendt 939 Vario has a rear PTO running at 540 rpm / 1000 rpm.
The hydraulic pump of the Fendt 939 Vario delivers 160.0 L/min (42.3 gpm).
Source · Traktorenlexikon, “Fendt 939 Vario”

How much horsepower does a 939 Vario have?
No sourced power figure for the 939 Vario is on record yet.
How much will a 939 Vario lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 939 Vario are below.
| System | Load sensing |
|---|---|
| Pump flow | 42.3 gpm · 160.0 L/min |
| Rear PTO | engine-driven, 540 rpm / 1000 rpm @ 1,577 engine rpmEngages under load |
| PTO shaft | 1 3/4"-6 splines |
Source · Traktorenlexikon, “Fendt 939 Vario”
What transmission does a 939 Vario have?
Transmission specifications for the 939 Vario are below.
| Clutch | Wet multi-disc clutch as PTO clutch |
|---|---|
| Steering | Hydrostatic steering with Reaction steering system |
| Top speed | 37.3 mph · 60 km/h |
Source · Traktorenlexikon, “Fendt 939 Vario”
How much does a 939 Vario weigh?
A 939 Vario weighs 23,876 lb (10,830 kg) unladen.
| Unladen weight | 23,876 lb · 10,830 kg |
|---|---|
| Maximum permissible mass | 39,683 lb · 18,000 kg |
| Wheelbase | 120.1 in · 3,050 mm |
| Length | 222.6 in · 5,655 mm |
| Width | 108.3 in · 2,750 mm |
| Height | 132.8 in · 3,372 mm |
| Ground clearance | 18.9 in · 480 mm |
| Front track | 82.7 in · 2,100 mm |
| Rear track | 80.7 in · 2,050 mm |
| Turning radius, braked | 22.8 ft · 6.95 m |
Source · Traktorenlexikon, “Fendt 939 Vario”
What oil does a 939 Vario take, and how much?
A 939 Vario engine takes 40.2 qt (38 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 40.2 qt · 38 LSource: Traktorenlexikon, “Fendt 939 Vario” · single source, not independently verified |
| Transmission | 70.8 qt · 67 LSource: Traktorenlexikon, “Fendt 939 Vario” · single source, not independently verified |
| Hydraulic | 115.2 qt · 109 LSource: Traktorenlexikon, “Fendt 939 Vario” · single source, not independently verified |
| Cooling system | 31.7 qt · 30 LSource: Traktorenlexikon, “Fendt 939 Vario” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Common questions about the Fendt 939 Vario
Is a 939 Vario two-wheel drive or four-wheel drive?
The Fendt 939 Vario is four-wheel drive (4WD).
What PTO does a 939 Vario have?
A 939 Vario has a 540 rpm / 1000 rpm rear PTO on a 1 3/4"-6 splines shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Fendt 939 Vario”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt 939 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-77813 · revision 933497. Wikibooks contributors (Traktorenlexikon). Original document