WhichTractor
  • Rigid chassis
  • WhichTractor size: High-power
  • Lab tested ×1
  • 2002–2006

It sits on the standard-size/high-power boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Fendt 926 Vario Hydraulics & PTO specifications

18 hydraulics and PTO values on record for the 926 Vario.

Measured at the PTO shaft

267.4 hp

Source · OECD Test 2066, measured

What hydraulics does a 926 Vario have?

Hydraulic and hitch specifications for the 926 Vario are below.

Hydraulics & hitch — 926 Vario Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Hydraulic controlLoad sensingOn record for 1 of 2 configurations
Pump flow30.9 gpm · 117 L/minOn record for 1 of 2 configurations
Rear remote valves4On record for 1 of 2 configurations
Three-point hitch categoryCategory 3On record for 1 of 2 configurations
Front hitch availableYesOn record for 1 of 2 configurations

Source · Traktorenlexikon, “Fendt 926 Vario”

What PTO does a 926 Vario have?

A 926 Vario has a 540/1000 rpm rear PTO.

PTO — 926 Vario PTO
Rear PTO speeds540/1000 rpm
Rear PTO shaft45 mm, 20 splines
Front PTO available, optionalYesSource 2On record for 1 of 2 configurations

Source · OECD test report 2066, 2003

How much power does a 926 Vario deliver at the PTO?

On OECD Test 2066, the 926 Vario delivered 267.4 hp (199.4 kW) at the PTO shaft, at maximum power.

OECD Test 2066 — 926 Vario as tested, configuration as printed: “4 WD · NA - F1 - 50 km/h”
PTO power, at maximum power267.4 hp · 199.4 kWAt 935 PTO rpmAt 1,900 engine rpm
PTO power, at rated engine speed242.1 hp · 180.5 kWAt 1,108 PTO rpmAt 2,250 engine rpm
PTO power, at standard PTO speed263.6 hp · 196.6 kWAt 1,001 PTO rpmAt 2,033 engine rpm
PTO shaft speed, at maximum power935 rpm
PTO shaft speed, at rated engine speed1,108 rpm
PTO shaft speed, at standard PTO speed1,001 rpm
Hydraulic power, at maximum power29.1 hp · 21.7 kW
Hydraulic pump delivery, at maximum power19.7 gpm · 74.5 L/min
Three-point lift force15,175 lbf · 67.5 kN

Source · OECD test report 2066, 2003

Where this page comes from

18 hydraulics and PTO values from OECD test report 2066, 2003; and Traktorenlexikon, “Fendt 926 Vario”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 066: Fendt 926 Vario — Licence not stated by the publisher; facts cited, OECD-2066 · published 2003-05-27 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
  2. Traktorenlexikon: Fendt 926 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-83086 · revision 1068927. Wikibooks contributors (Traktorenlexikon). Original document