- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1949–1950
- 580 built
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Fahr D 28 Dimensions & weights
13 dimension and weight values on record for the D 28.
Engine power, claimed · gross or net not stated
27.6 hp
20.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fahr D 28”, claimed
How big is a D 28?
A D 28 is 115.0 in (2,920 mm) long, 61.6 in (1,565 mm) wide and 57.5 in (1,460 mm) tall.
| Wheelbase | 74.0 in · 1,880 mm |
|---|---|
| Length | 115.0 in · 2,920 mm |
| Width | 61.6 in · 1,565 mm |
| Height to top | 57.5 in · 1,460 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 50.0–56.9 in · 1,270–1,446 mmWikibooks gives one track for both axles |
| Rear track | 50.0–56.9 in · 1,270–1,446 mmWikibooks gives one track for both axles |
| Turning radius without brakes | 9.8 ft · 3.00 m |
Source · Traktorenlexikon, “Fahr D 28”
How much does a D 28 weigh?
A D 28 weighs 4,365 lb (1,980 kg) unballasted.
| Weight, unballasted | 4,365 lb · 1,980 kg |
|---|---|
| Maximum front axle load | 2,094 lb · 950 kg |
| Maximum rear axle load | 3,638 lb · 1,650 kg |
Source · Traktorenlexikon, “Fahr D 28”
What tyres does a D 28 take?
Tyre sizes for the D 28 are below.
| Front tyre, standard | 6.00-16 |
|---|---|
| Rear tyre, standard | 11.25-24 |
Source · Traktorenlexikon, “Fahr D 28”
Where this page comes from
13 dimension and weight values from Traktorenlexikon, “Fahr D 28”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fahr D 28 — CC BY-SA 4.0, WIKIBOOKS-TL-49050 · revision 990483. Wikibooks contributors (Traktorenlexikon). Original document