- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1989
- 1,000 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz Intrac 2004 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the Intrac 2004.
Engine power, claimed · gross or net not stated
68.7 hp
51.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz INTRAC 2004”, claimed
How much will an Intrac 2004 lift?
An Intrac 2004 lifts 5,291 lb (2,400 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 12.4 gpm · 47.1 L/min |
| Hydraulic pressure | 2,538 psi · 175 bar |
| Rear remote valves, optional | 4 |
| Lift capacity at ball ends | 5,291 lb · 2,400 kg |
| Hitch control | Float position, draft, mixed and position control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz INTRAC 2004”
What PTO does an Intrac 2004 have?
An Intrac 2004 has a 540/1000 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Rear PTO shaft | 29 x 34,9 x 8,7 mm |
| Front PTO available | Yes |
Source · Traktorenlexikon, “Deutz INTRAC 2004”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Deutz INTRAC 2004”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz INTRAC 2004 — CC BY-SA 4.0, WIKIBOOKS-TL-55918 · revision 1024524. Wikibooks contributors (Traktorenlexikon). Original document