- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1978–1982
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz-Fahr DX 90 Hydraulics & PTO specs
13 hydraulics and PTO values on record for the DX 90.
Engine power, claimed · gross or net not stated
87 hp
65 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 90”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a DX 90 lift?
A DX 90 lifts 8,223 lb (3,730 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 10.9 gpm · 41.4 L/min |
| Steering pump flow | 9.6 gpm · 36.2 L/min |
| Hydraulic pressure | 3,046–3,771 psi · 210–260 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 8,223 lb · 3,730 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 90”
What PTO does a DX 90 have?
A DX 90 has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 2,057 rpm |
| Rear PTO shaft | 1 3/8"-6 splines (Form-1) |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 90”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 90”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 90 — CC BY-SA 4.0, WIKIBOOKS-TL-88178 · revision 1089859. Wikibooks contributors (Traktorenlexikon). Original document