- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1978–1984
- 62 built
WhichTractor size, not the maker’s category
Deutz-Fahr DX 160 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the DX 160.
Engine power, claimed · gross or net not stated
148.0 hp
110.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 160”, claimed
How much will a DX 160 lift?
A DX 160 lifts 14,330 lb (6,500 kg) at the lower-link ends.
| Pump flow | 15.4 gpm · 58.4 L/min |
|---|---|
| Steering pump flow | 11.9 gpm · 45.0 L/min |
| Hydraulic pressure | 3,771 psi · 260 bar |
| Rear remote valves, optional | 3 |
| Lift capacity at ball ends | 14,330 lb · 6,500 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 160”
What PTO does a DX 160 have?
A DX 160 has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/8"-21 teilig (Form-2) |
| PTO power, claimed | 126.7 hp · 94.5 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Deutz-Fahr DX 160”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 160”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 160 — CC BY-SA 4.0, WIKIBOOKS-TL-87338 · revision 1089850. Wikibooks contributors (Traktorenlexikon). Original document