- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1993–1995
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz-Fahr AgroStar 4.68 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the AgroStar 4.68.
Engine power, claimed · gross or net not stated
90 hp
67 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.68”, claimed
How much will an AgroStar 4.68 lift?
An AgroStar 4.68 lifts 8,378 lb (3,800 kg) at the lower-link ends.
| Pump flow | 13.0 gpm · 49.2 L/min |
|---|---|
| Steering pump flow | 9.8 gpm · 37.0 L/min |
| Rear remote valves, optional | 4 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 8,378 lb · 3,800 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.68”
What PTO does an AgroStar 4.68 have?
An AgroStar 4.68 has a 540/1000/750 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000/750 rpm |
| Engine speed at 540 PTO | 2,121 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.68”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr AgroStar 4.68”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr AgroStar 4.68 — CC BY-SA 4.0, WIKIBOOKS-TL-88623 · revision 1073171. Wikibooks contributors (Traktorenlexikon). Original document